Introduction
This research paper examines the usability and demand of the thread mill bicycle in the UK market. The concept of the thread mill bicycle is a new concept and it’s quite useful for the users. This process combines different mechanical parts and improves its usefulness for the users. Treadmill bicycle is an innovative concept that is used for travelling and to exercise at the same time. It doesn’t need any fuel and thus quite more efficient, and useful from the exercise point of view. Users can travel to the stated distances, and don’t cause any harm to the environment at the same time.
Research aim
The research aim is to find how the bicycle is being used by the people for improving the health condition. Moreover the cost of this equipment is quite less, as compared to cars and other heavy vehicles. Thus, it is one of the most relevant and effective equipments that are used for improving the health condition. The research aim is to find the facts and the information, by selecting an appropriate research conduct method. This is the most relevant process, where the aim defines the method and the process that will be followed for the collection and analysis of the information.
The research aim defines the process or the steps that will be followed for the fact collection and its analysis. An outline is prepared so that he facts and other related information could be collected and used for the conduct of there research work. With a proper outline, it is possible for the researchers to use a proper method for the conduct of the research work.
Research objective
The research objective is to find the points that are mentioned below –
- How does the thread mill bicycle improve the quality of lives of the users?
- What are the long term benefits associated with this cycle, and why is it preferred a lot by the users of different age groups?
3
- How does the cycle benefit the users and protects the environment?
The research objective is to collect the useful information that will be included in the research conclusion. This is an essential part of the research planning work, where the relevant information would be collected and used for concluding the task. Research approach A research approach will define the method that will be followed to approve how the thread mill bicycle will benefit the health of the users.
Research approach outlines the plan that will be talk about the procedure or steps that will be followed for the data collection, its analysis, and interpretation. The research problem is examined, and a corrective measure and process will be applied for the fact collection and its evaluation.
Research approach is usually done in two different ways and they are –
a. Inductive method
b. Deductive method
Inductive approach for the research analyze will need qualitative data that will simplify the process of the fact collection and its evaluation. Quantitative data collection and evaluation method will be followed in the deductive approach. Mixed data type is another method used for the fact collection. This method consists of the mixture of inductive and deductive approach. Inductive method will include theories and observations for collecting the facts and in concluding the research process.
An observational method is included for collecting the needed facts that will be used for the research conduct. In an inductive research method a pattern from the observation is defined and the development of the explanations of the theories used for the fact collection is wisely selected. With this defined pattern the questions to the research work and the hypothesis could be properly selected and implemented. However, this approach will not use any theories and hypotheses for the fact collection and its analysis process. Inductive method is preferred by their researchers to collect relevant information and to move away from the abstract ideas and generation. In an inductive method, the facts are found and analyzed to reason them properly. This is done at every stage of the fact collection and its evaluation.
The reasoning formed in this approach analyze the points mentioned below-
- Includes subjectivity questions
- Includes the induction method
- Has drafted open-ended questions
- Defines the process orientation and the method that will be followed for the fact collection
- The analysis will be done on the basis of narrative description and it will include constant comparison process.
This method is selected to append the dynamics of the system used for the fact collection and to apprehend its robustness and closely include the individual behavior analysis. These are important to construe alternative options that will be used for the fact collection and its evaluation. In a deductive research method, the researcher will concentrate on finding the answers to the hypothesis included in the work. The facts will be collected on the basis of the existing there, and by designing a proper research strategy that will be used to test the hypothesis statement. This method uses the reasoning process, where the exact answers are found and analyzed by the researcher.
The link of the facts with the research theory is included in the evaluation part, and thus it is preferred by the users. Deductive design is created to apprehend the requirements for the collection of the facts, and to get accurate information that will improve the quality of the facts used in the research task. This method explains the views by analyzing the research hypothesis work. This method is usually used to explain the casual relationship between the variables and the concepts. It also allows measuring the concept quantitatively. The generalized research work and its findings can be properly carried until the facts are collected and analyzed by the researcher.
Save your time!
We can take care of your essay
- Proper editing and formatting
- Free revision, title page, and bibliography
- Flexible prices and money-back guarantee
4
Deductive method for the research work uses lots of the sources that will be collected from reliable sources. The challenge with this system is that the researcher usually doesn’t get enough time to collect and evaluate the facts, within the given period of time. This method usually tests the theory and creates its link with the research questions and aims. A logical path is followed and it is integrated with the reasoning method. Theory analysis is conducted so that the needed facts and research information are collected and related with the hypothesis. The process used are tried and tested so that the researcher would include the needed and useful information for the fact collection. Deductive method will be based on the hypothesis factors where the answers would be derived from the theories. The hypothesis would be formulated and it will be used in proposing the relationships between the two mentioned variables. Selected hypothesis will be also applied to the selected methods like the regression and the correlation method. These methods are quite helpful in the collection and the analysis of the facts. The outcome of these tests are either cornered or rejected based on the theory selected by the researcher. These findings and analysis are properly compared and used for the selection of the right information that is used for the conduct of the research work.
Justification This research method will use the inductive method to collect the facts about how the thread mill bicycle has benefitted the people in the UK. An observational methodic is implied for the fact collection and its analysis that forms the major part of the research work. Moreover a logical analysis and explanation process is used for the analysis of the information and to evaluate the information that will improve the quality of the research work. The objective to select this method will be including the right information through a reasoning process, which is not available with the deductive method. Research methods Research method is a strategy aim used to implement the plan t acquires the needed information. It outlines a better research design that will allow the data to be collected and used in an accurate manner, so that the questions are properly answered by the researcher.
5
The selection of the research method completely depends upon the goals. It also depends upon the facts that need to be found by applying the specification method. This study is being conducted to find how thread mill has impacted the lives of the people in the UK. A decision to collect the data and use it for the research conduct is being planned and implemented by their researcher. Some of the commonly used research methods include –
1. Observation and participant method
2. Survey method
3. Interviewing process
4. Focus group
5. Experiments
6. Secondary data collection method
7. Mixed method
The most suitable method that is preferred by the researchers to collect the facts is the observation method, interviewing method, survey method, and experimentation. Through these methods the researcher could collect and analyze gauge information and facts that will help to conclude the research work. The research plan forms the most important aspect of the fact collection, where the researcher has to consider the risks and other challenges while collecting and evaluating the details. In an observation method, the points and other details presented by the members or the participants are closely observed. This is the key requirement that would help in organizing the information and in collecting the facts that would be used for concluding the research work. The other method includes survey process, where an elaborated survey method will be used for the fact collection and its evaluation. This is an important part of the research planning, where the researcher will get involved in evaluating the facts through the survey methodic and ensure to collect the needed and accurate.
6
information. Survey is conducted randomly and it will be done with an intention of collecting and evaluating the facts that will be needed for concluding the research work. A group of people would be selected for the interviewing process, where the facts and the needed information will be properly organized and conducted. Through the interviewing method, the views and opinion of the members involved or included in the research task would be analyzed. This is quite important for the collection of the relevant facts that is needed for the conclusion of the research work. Focus group is another option, where the group members work together to find the answers to the questions included in the research work. This is a time-consuming process, where the facts are closely evaluated and its relevance to the analysis of the information is conducted. Focus group allows the researcher to evaluate the facts and points that will be useful in the research work conduct. For this research work, survey and interviewing method will be used. A survey would be done on 17 people belonging to different age groups and income class.
This selecting would be made randomly, and it would be done with an intention to collect the views of the members about using the thread mill bicycle. Questions would be either open ended or close ended or it would help in getting maximum information about the research task. The questions would be formed in accordance to the research questions that are formulated by the researcher. With this process, it is quite simple and fast to collect and evaluate the required facts. Interviewing method will be also suitable for the information collection, where the research aim is to collect and evaluate the facts that will be used to conclude the research work. With this method, the views of the participants about the usage of the thread mill bicycle can be acquired by the researcher. This information will help to conclude the research work, and in finding suitable answers that would be helpful in the conduct of the research work. Data collection The data collection method is divided into two aspects that are primary and secondary method. Both the process helps in evaluating the required facts that will be used to find the relevant details for the research work. In the primary data collection method the researcher will conduct
7
the task on the quantitative method. This method is effective, where the information or the facts are to be collected and analyzed on large numbers. Primary research method will include the survey and interviewing method, where the intention is to collect and examine the relevant information that is being used in the research work. The results or the opinion of the members or the participants would be collected in the Likert format where the facts will be helpful in the conclusion of the research work. With such a method, the results are quite easier to be acquired and compared. It is a prime requirement for the conclusion of the research work, and to use the data for evaluating the views of the people. Interviewing process will include conducting interviews with the selected group of the people either through the phone or in person.
A formal interview is conducted, so that the needed information is collected by the researcher. The formed questions have to be clear, precise and related to the research task. Questions drafted by the researcher could be sent to the participants through the email process or over the post. One of the methods is selected so that the researcher could get the required information and properly use it to conclude the research work. It is quiet an important part of the research work, where the researcher would have to indulge into the planning activities and follow the measures and methods included in there research task. Secondary data collection method This is another method that is used by the researcher for the fact collection. Needed information for the conduct of the research work would be collected from journals, books, and recognized website sources.
This method is cost effective, and quite reliable as compared to the others. It helps in determining the process that will be followed for the fact analysis including evaluating the information collected from various sources. Justification For this research work, primary method of data collection would be used.
8
Data analysis
The data analysis would be used for systematically collecting and using the information for the fact collection. With an appropriate technique, it is possible to conclude the research work and include the necessary of information that will improve the quality of the research task. This is an important part of the research work where the facts would be collected and complied so that an accurate information and conclusion could be made. The method would examine or analyze the facts that were collected for the research work, and enable the members to conclude the task on a positive.
Conclusion
The research work is based on the plans that are prepared by the researcher. Facts collected from various sources have to be properly used in the conduct of the works, as it would help in getting the right resist needed for the conduct of the research task. Research plan are conducted to evaluate the facts and to improve the value of the fact collection.
Stuck on your essay?
