Indiana BMV Permit Test Practice Guide

Indiana BMV Practice Permit Test If you are approaching an intersection with a non-operating signal, If you are approaching an intersection with a non-operating signal, you should stop before entering the intersection. After stopping, you should: you should yield the right-of-way to cross-traffic and then proceed with caution. When driving in urban residential areas, vehicles may not exceed: 30 mph or posted speed limit With any turning vehicle, the rear wheels follow a shorter path With any turning vehicle, the rear wheels follow a _________ than than the front wheels. The longer the vehicle is, the greater the the front wheels. difference will be. Truck drivers initially swing out before making a turn. The likelihood of an accident increases if a driver is under the influence of: alcohol, drugs, or prescription medication If your vehicle's conventional disc or drum brakes suddenly fail, you should immediately: you should shift to a low gear, if possible, and pump the brake pedal fast and hard several times. This may build up enough brake pressure to stop your vehicle. Indiana law requires the driver and all passengers to use seat belts at all times a vehicle is: in operation you are advised to carefully pull as far off the road as possible, and What should you do if fog closes in completely while driving, and stop. Headlights and flashing emergency signals should be used visibility is reduced to near zero? while driving in fog. When visibility is diminished, drivers must use low-beams when: within 500 ft of an oncoming vehicle ou must slow down and move into a lane that is not adjacent to When you see a stationary emergency vehicle with flashing lights, the emergency vehicle, if it is possible to do so safely. If it is not you must: possible to do so safely, you must slow down and proceed with caution. When operating a vehicle with a steering wheel interlock system, never turn _________ while the vehicle is in motion. the ignition to the lock position Which of the following statements is true when driving on highways? slow moving vehicles should use the right lane & fast moving vehicles should use the left lane. If you are involved in an accident, you must: provide information to other vehicles involved and get help for injured parties When making a U-turn, you must NOT: make it on the curve of a road or near a hill A good rule for drivers to follow is to stay at least two to three Defensive drivers stay _________ behind the vehicle ahead while seconds behind the vehicle ahead. When following a vehicle, driving. watch for the vehicle ahead to pass a fixed object and estimate how much time elapses before you pass the same object. If another vehicle is passing you on the left-hand side of the road, allow the other vehicle to pass safely, and: do not increase your speed. The maximum speed limit in a highway work zone must not exceed: 45 mph in any location To avoid the effects of glare of the oncoming headlights, the driver should not look directly into the lights of an approaching vehicle, but instead: focus on the right side of the road If a tornado is nearby, you must: stop, exit vehicle, go to low-lying area It is dangerous and illegal to try to pass other vehicles when Passing other vehicles is prohibited when you are within 100 feet _________ of an intersection, railroad crossing, bridge, viaduct of an intersection, railroad crossing, bridge, viaduct or tunnel. or tunnel. You must give a proper turn signal at least 200 feet before turning If the speed limit is 50 mph or greater, you must give proper turn or changing lanes. If the speed limit is 50 mph or more, you signal ________ before turning or changing lanes. must give a proper turn signal at least 300 feet before turning or changing lanes. If you are driving near a school, you must slow down to _________ for the school zone. the lowest posted speed limit The first rule of a safe and legal turn is: move into proper lane well before the turn 1/4 If you are approaching a stop sign, you must: stop at the solid white line A red flashing light at an intersection is equivalent to: a stop sign You must avoid _________ while crossing railroad tracks. stopping or shifting gears Flashing arrow boards are often used to indicate: a detour ahead When you enter a roundabout or a circular intersection, you must proceed: in a counter-clockwise direction A yield sign indicates that a driver must slow down when approaching an intersection and _________ if a vehicle or pedestrian with the right-of-way is approaching from another direction. be prepared to stop In a situation with a flat tire or blow-out, you should first: hold the steering wheel firmly When you enter an interstate on-ramp, you must stay to the right and _________ to allow your car to merge with traffic. increase your speed in the acceleration lane You must avoid driving next to other vehicles on multi-lane roads because: someone may crowd your lane You should not pass under the following conditions, except: your lane is separated by a broken yellow line When overtaking and passing another vehicle on a two-lane road, you should pass only to: the left of the vehicle __________are made to stop runaway vehicles safely without injuring drivers and passengers on steep mountain grades. escape ramps When you are following a vehicle which makes frequent stops, you should allow _________ than usual. more following distance A red arrow at an intersection indicates that: turning traffic must stop If you are stopped at a traffic light and another vehicle is approaching you from behind at a high speed, you should: pull your vehicle forward When driving on gravel or dirt, you must slow down because: you do not have much traction When you drive in city traffic, you should try to look at least: one block ahead When following a large vehicle at night, always: Dim your headlights. Bright lights can blind the driver, as they reflect off the vehicle's large side mirrors. A broken yellow line alongside a solid yellow line indicates that: passing is permitted on the side with the broken yellow line To control speed on steep downgrades, drivers should: use a lower gear A two-headed arrow with one head pointing straight ahead and the other pointing to the left means: you may proceed straight or turn left When turning from a two-way street onto a one-way street, you must: begin the turn with your left wheel as close as possible to the yellow dividing line. If the one-way road has two lanes, turn into its left lane or right lane, whichever is free of traffic. _________ indicates the outside edge of the traffic lane, and may be crossed only by traffic moving to or from the shoulder. solid white line A driver entering a traffic circle or rotary, must yield the right-of-way to: drivers already in the circle and pedestrians If a broken white line is on your side of the center dash stripe, then: you may cross the line to pass other vehicles If you are overtaking a bicycle and an oncoming vehicle is approaching, you must: If you are overtaking a bicycle and an oncoming vehicle is approaching, slow down and let the vehicle pass first so that you can give extra room to the bicycle. Drivers must maintain a constant speed when passing and reentering the lane in front of trucks or buses, since trucks/buses require: longer distances to slow down than other cars. If you plan to turn beyond an intersection, you must: signal after you just pass the intersection _____lines mean that passing is not allowed in either direction. solid double yellow When you see a solid center line on your side of the road, you must: not change your lane 2/4 When you see a flashing yellow signal at an intersection, you should: slow down and cross intersection carefully Work zone or construction zone signs are usually displayed in: orange w/ black letters Which of the following statements about a freeway is NOT correct? cross a solid line immediately after entering or exiting If there is an emergency vehicle directly behind your vehicle when you are in heavy traffic, you should: keep moving slowly till you get out of the way A yield sign indicates that a driver must slow down when approaching an intersection and _________ if a vehicle or pedestrian with the right-of-way is approaching from another direction. be prepared to come to a complete stop bring your vehicle into the nearest left lane for traffic on the road When turning left from one one-way road to another one-way road: you are entering, unless a lane use control sign or pavement markings direct you otherwise. Whenever you want to change lanes, you must check for traffic: both behind you and beside you Rear-end crashes are common on highways because many drivers: follow too closely If you double your speed on a highway, your braking distance increases by four times When it looks like a collision may happen, drivers must take an immediate step to: slow down, speed up, or turn . whatever you need to do to try and avoid the collision If you turn from a high speed, two-lane roadway, you must _________ if you have traffic following you. try not to slow down too early parallel parking steps Position your car beside the vehicle you'll be parking behind. Get close to its side, but not so close that you'll have a hard time maneuvering without hitting it. Once the back of your front door is lined up with the rear bumper of the car next to you, turn the steering wheel in the opposite direction (away from the curb). Pull forward a bit to center yourself within the space. Which of the following must NOT be done if your vehicle's tire blows out? quickly move to the shoulder of the road If you are on a single or two-lane road and come to an intersection with a divided highway or a roadway with three or more lanes, you must yield the right-of-way to other traffic When two vehicles meet on a steep mountain road where neither can pass, which vehicle has the right-of-way? vehicle traveling uphill If you are approaching an intersection with a non-operating signal, you should: stop before entering the intersection When stopped behind another vehicle on a hill, you should stay back at least: one vehicle length When passing a large vehicle, do not pull back in front of the truck do not pull back in front of the truck until you can see its headlights until you can see its: in your inside rear view mirror. What should you do, if you miss your exit on an expressway? continue to next exit When a traffic signal turns green at an intersection and you are going straight through, you must: make sure their are no vehicles still in the intersection Which of the following road rules about turning is NOT correct? Where there are no signs to control turning, you must turn into the lane farthest from the one you came from Before backing your vehicle, you should look to the front, sides and rear, and continue to look _________ while backing to the rear When making a right turn from a four-lane divided highway, enter the right lane well in advance of the turn and make: a tight turn into the right lane and cross the stree Car drivers should never share the same lane with a motorcycle, even if the lane is wide and the cyclist is riding to one side, because: the can change speed or direction very sudden and quickly 3/4 Red Traffic Signs Immediate Action to avoid threats to traffic safety (wrong way, stop) Yellow or Yellow Green Traffic Sign Prepare drivers for what is ahead (slippery when wet, pedestrian crossing) White Traffic Signs Display traffic regulations that drivers must obey such as speed limits, as well as information as state highway markers. Ex. "No Turn On Red" Orange Traffic Signs warn drivers of conditions ahead due to highway construction or maintenance projects Green Traffic Signs indicate directions, highway entrances and exits, and distance to upcoming destinations Blue Traffic Signs Display traveler information to drivers. Brown Traffic Signs nearby parks and recreational areas Circular Traffic Signs alert drivers of upcoming railroad crossings Three-Sided Traffic Signs warn drivers to slow down when approaching an intersection and to be prepared to come to a complete stop Pennant-Shaped Traffic Signs posted to the left-hand side of two-way roads to warn drivers not to pass other vehicles on the left Square Traffic Signs Display regulations that drivers must obey. (no left turns) Rectangular Traffic Signs display traffic regulations that drivers must obey such as speed limits, as well as helpful information such as state highway markers Diamond Shaped Traffic Signs Warn drivers of upcoming road conditions and hazards (divided highway ends, lane ends) Five-Sided Traffic SIgns warn driver that they are entering an area near a school in which children may be crossing the road Eight-Sided Traffic Signs warn driver to stop and yield the appropriate right-of-way at an intersection 4/4