Chemistry Answers Chapter 5

Chapter 5 Exercises 1 B 2 B 3 A 4 D 5 C 6 q = mc∆T, so ∆T = 9395.4 J 6.11 × 10–3 mol = –1.54 × 106 J mol−1 ∆Hc = = –1540 kJ mol−1 100 q = = 7.25 °C mc 100 × 0.138 (b) C6H12O6(s) + 6O2(s) 7 A 10 (a) ΔT = 36.50 – 25.85 = 10.65 °C (or K) 8 A H T = 25.0 + 7.25 = 32.3 °C 9 C ∆H = –1540 kJ mol –1 6CO2(g) + 6H 2O(l) q = mc∆T q = m(H2O) × c(H2O) × ∆T(H2O) + m(Cu) × c(Cu) × ∆T(Cu) = (200.00 g × 4.18 J g K × 10.65 K) + (120.00 g × 0.385 J g−1 K−1 × 10.65 K) −1 = 8900 J + 492 J q = 9392 J 1.10 g 180.18 g mol−1 = 6.11 × 10−3 mol n(C6H12O6) = Extent of reaction −1 11 q = mc∆T q = 150.00 g × 4.18 J g−1 K−1 × (31.5 – 25.0) K = 4075.5 J = 4100 J (to 2 s.f.) 0.0500 g n(P) = 30.97 g mol−1 = 1.61 × 10−3 mol 22 2 10:01 equation q = mc∆T, where q is the heat change, m is the mass of the substance(s) changing temperature, c is the specific heat capacity of the substance(s) changing temperature and ∆T is the measured temperature change occurring in the substance(s). – 4100 J 1.61 × 10−3 mol = – 2525 × 103 J mol−1 ΔHc = = – 2500 kJ mol−1 12 The precision of the answer is limited by the precision of measurement of the temperature difference. The value is lower than the literature value owing to heat losses and incomplete combustion. 16 A 17 ΔH⊖ = –394 kJ – (–283) kJ = –111 kJ q = mc∆T 18 ΔH⊖ = –180.5 kJ + (+66.4) = –114.1 kJ 19 ∆H⊖ = (2 × (–33.2 kJ mol–1)) + (+9.16 kJ mol–1) = –57.24 kJ mol−1 20 B = 1000 g × 4.18 J g−1 K−1 × (70.0 – 20.0) K = 209 kJ, for 1 mole of 1 mol dm solution −3 ∆H = –209 kJ mol−1 13 ∆T = 32.3 – 24.5 = 7.8 K 24 n(NaOH) = If the mass of the solution is taken as 105.04 g (mass of water + mass of NH2Cl dissolved), ∆H = +16.5 kJ mol–1. If the mass of the solution is instead assumed to be 100.00 g (mass of water only), ∆H = +15.7 kJ mol–1. q = mc∆T = 100.00 g × 4.18 J g−1 K−1 × (21.79 – 25.55) = –1571 J for 5.35 g q = 293.6 J per g n(NH4Cl) = 53.50 g mol −1 ∆H = 293.6 J g−1 × 53.50 g mol−1 ∆H is change in enthalpy, the heat content of a system. Enthalpy cannot be measured directly but enthalpy changes can be calculated for chemical reactions and physical processes from measured temperature changes using the D → CH3COCH3(l) 25 +330 kJ mol−1 26 –57.2 kJ mol−1 27 D 28 2MgO(s) + C(s) → CO2(g) + 2Mg(s) ∆H⊖reaction = (–394) – 2(–601) = +810 kJ mol−1 Such a highly endothermic reaction is unlikely to be feasible. 29 B 32 1 × C–C + 6 × C–H 33 B 34 –125 kJ mol−1 35 –486 kJ mol−1 36 B 38 C2H5OH(l) + 3O2(g) → 2CO2(g) + 3H2O(g) = 15.7 kJ mol−1 15 23 (b) Under standard conditions of 298 K (25 °C) and 1.00 × 105 Pa. If the reaction involvves solutions these have a concentration of 1.00 mol dm–3. = 3300 J 14 D 1 2O2(g) ΔH⊖f = –248 kJ mol−1 = 100.00 g × 4.18 J g−1 K−1 × 7.8 K Assumptions: no heat loss, c(solution) = c(water), m(solution) = m(H2O), density(H2O) = 1.00 22 (a) 3C(graphite) + 3H2(g) + q = m(H2O) × c(H2O) × ∆T(H2O) 50.00 × 0.950 = 0.0475 mol 1000 –3300 J ∆H = = 68.6 × 103 J mol−1 0.0475 mol = –69 kJ mol−1 C 21 H A 30 37 31 C C H H C C H H O H(l) + 3 × O =O(g) → 2 × O=C=O(g) + 3 × H–O–H(g) 23 3 10:01 Answers Bonds broken C–C ∆H / kJ mol−1 Bonds formed 4 C=O +346 3 O=O O–H C–O 3 × (+498) 6 H–O +463 +358 5 C– H Total 5 × (+414) +4731 ∆H / kJ mol−1 X = 2ΔH ⊖i (K), 2 × the first ionization energy of potassium 4 × (–804) Y = ΔH ⊖e1 (O) + ΔH ⊖e2 (O), the sum of the first and second electron affinities of oxygen 6 × (–463) Z = ΔH ⊖f (K2O(s)), the standard enthalpy of formation of K2O(s) (c) ΔH⊖latt(K2O) = 361 + 2(89.2) + 2(419) + 21(498) + (–141) + 753 –5994 = +2238 kJ mol−1 ΔH ⊖ = +4731 – 5994 kJ mol−1 = –1263 kJ mol−1 The calculated value is less exothermic than the enthalpy of combustion in Table 13. This is because the bond enthalpy calculation assumes all species are in the gaseous state: water and ethanol are liquids. 39 46 B 47 They decrease down Group 17 as the ionic radius of the halide ion increases. 48 Consider first the effect of increased ionic charge (Na+/Mg2+ and Cl−/O2−). The charge of both the positive and negative ions is doubled. This leads to a quadrupled increase in the lattice energy. This effect is further enhanced by the decrease in ionic radius of the Mg2+ compared to Na+ due to the increased nuclear charge of the metal and the decreased ionic radius of the oxide ion because of a decrease in the number of energy levels occupied. 49 C 51 Bonding in AgBr is stronger because Ag+ has smaller ionic radius and more covalent character, which makes bonding stronger than that based on the ionic model. 52 They have similar ionic radii but the enthalpy of hydration of the F− ion is significantly more exothermic. This suggests that there is an additional interaction to the electrostatic attraction between the charged ion and the polar molecules. F− ions form hydrogen bonds with the water. 53 (a) ΔH⊖sol(KCl) = ΔH ⊖lattice(KCl) + ΔH ⊖hyd(K+) + ΔH⊖hyd(Cl–) (a) Step II, as bonds are formed. (b) O2 has a double bond. O3 has resonance structures/delocalization with bonding intermediate between double and single bonds; the bond order is 1.5. The bonding in O2 is stronger therefore reaction I needs more energy. 40 L × Ephoton = 498 kJ = 498 000 J 498 000 Ephoton = J (= 8.272 × 10−19 J) 6.02 × 1023 λ = hc/Ephoton 6.02 × 1023 = 6.63 × 10−34 × 3.00 × 108 × 498 000 = 2.41 × 10−7 m = 241 nm Any radiation in the UV region with a wavelength shorter than 241 nm breaks the O=O bond in oxygen. 41 The oxygen double bond is stronger than the 1.5 bond in ozone. Thus, less energy is required to dissociate O3 than O2. Longer wavelength radiation of lower energy is needed to dissociate O3 . 42 A 45 (a) K2O(s) → 2K+(g) + O2−(g) 43 C 44 D (b) W = ΔHatom (O), the enthalpy of atomization of oxygen (which also corresponds to 1 2E(O=O), the O=O bond enthalpy) 24 4 50 A = +720 – 340 – 359 kJ mol−1 = +21 kJ mol−1 (b) ΔH⊖sol(KCl) = +17.22 kJ mol−1 (from data booklet) 21 − 17.22 % accuracy = × 100% = 22% 17.22 10:01 The large inaccuracy is based on the calculated value being found by the difference between two large values. B A 58 (a) ∆S is negative. The number of moles of gas decreases from reactants to products. 56 57 (a) ∆H is positive as heat is needed to break up the carbonate ion. (b) ∆S is positive as there is an increase in the amount of gas produced. 54 55 C 67 D (c) At low temperature: ∆G = ∆H and so is positive. At high temperature: ∆G = –T∆S and so is negative. (b) ∆S is negative. Three moles of solid and four moles of gas change into one mole of solid and four moles of gas. There is a small decrease in disorder. (c) ∆S is positive. A solid reactant is being converted into an aqueous solution so there is a large increase in disorder. The reaction is not spontaneous at low temperature but becomes spontaneous at high temperatures. 68 D 70 ∆Greaction = (–604 + –394) – (–1129) = 131 kJ mol−1 59 69 C As ∆Greaction is very positive, the reaction is not spontaneous under standard conditions. This accounts for the stability of calcium carbonate in the form of limestone, chalk and marble. S Gas 71 Liquid ΔH⊖reaction = 178 kJ mol−1 ΔS⊖reaction = 160.8 J K−1 mol−1 ΔG ⊖reaction = +178 – (2000 × 160.8 × 10−3) kJ mol−1 Solid = –144 kJ mol−1 T 60 N2(g) 191 + 3H2(g) → 3 × 131 2NH3(g) 2 × 193 S⊖ / J K−1 mol−1 72 B 73 (a) 2C(graphite) + 3H2(g) + 12O2(g) → C2H5OH(l) ΔS⊖reaction = 2 × 193 – (191 + (3 × 131)) (b) ΔS⊖reaction = +161 – (2 × 5.7) – (3 × 63.5) – (12 × 102.5) = –198 J K−1 mol−1 61 = –98 J K−1 mol−1 C(graphite) + 2H2(g) → CH4(g) 5.7 2 × 131 186 ΔS⊖reaction = 186 – (5.7 + (2 × 131)) = –82 J K−1 mol−1 = –229 kJ mol−1 When adding figures, the figure with the smallest number of decimal places determines the precision. (d) The reaction is spontaneous as ∆G is negative. 62 C 63 (a) H2O(s) → H2O(l) ΔH⊖reaction = –286 – (–292) = +6 kJ mol−1 ΔH⊖reaction (b) T = ΔS ⊖reaction 6000 = = 273 K 22.0 64 (c) ΔGreaction = –278 – (500 × –98 × 10−3) S⊖ / J K−1 mol−1 A 65 D 66 B (e) At high temperature: ∆G = –T∆S and so is positive. The reaction will stop being spontaneous at higher temperature. 74 C 77 When ∆G = –30 kJ mol 75 D 76 B −1 –30 kJ mol−1 = –123 – (T1 × –128 × 10−3) kJ mol−1 93 = (T1 × 128 × 10−3) T1 = 727 K When ∆G = +30 kJ mol−1 25 5 10:01 Answers between the layers. In diamond each carbon is bonded to four other atoms by single covalent bonds and the C=C bond order is 1. The total bonding is slightly stronger in graphite (higher bond orders) and this makes it more stable. +30 kJ mol−1 = –123 – (T2 × – 128 × 10−3) kJ mol−1 153 = (T2 × 128 × 10−3) T2 = 1195 K 78 When ∆G = –30 kJ mol−1 –30 kJ mol−1 = –93 – (T1 × –198 × 10−3) kJ mol−1 63 = (T1 × 198 × 10−3) T1 = 318 K 6 It has two unpaired electrons in the 2p sub-level. 7 With positive ions, there is generally a loose electrostatic attraction with the partially negatively charged negative oxygen atoms of the water molecules. Positive ions with higher charge densities, such as d block ions, may form complex ions with formal covalent coordinate bonds with the water molecules. There is increased covalent interaction between the Ag+ ions and the water molecules, which leads to more exothermic hydration enthalpies. 8 Sodium chloride is an ionic substance that contains alternating sodium and chlorine ions. When salt is added to water, the partial charges on the water molecule are attracted to the Na+ and Cl− ions. The water molecules work their way into the crystal structure and between the individual ions, surrounding them and slowly dissolving the salt – but as we have seen the enthalpy change is very small. The aqueous solution is more disordered and so has a higher entropy, as discussed later in the chapter. 9 When Kc = 1, ΔG ⊖reaction = 0 When ∆G = +30 kJ mol−1 +30 kJ mol−1 = –93 – (T2 × –198 × 10−3) kJ mol−1 123 = (T2 × 198 × 10−3) T2 = 621 K Challenge yourself 1 N2(g): N2(g) + O2(g) → 2NO(g) ΔH ⊖c = 90 kJ mol−1 2 The specific heat capacities depend on the number of atoms in the unit mass. So c is approximately inversely proportional to the relative atomic mass. 3 The temperature of the Bunsen flame is 5748 °C 4 The difference in the values is largely to due to the assumption that H2O is gaseous in the bond enthalpy calculation. (1) CH4(g) + 2O2(g) → CO2(g) + 2H2O(l) ΔH = –891 kJ mol−1 When Kc > 1, ΔG ⊖reaction < 0 (2) CH4(g) + 2O2(g) → CO2(g) + 2H2O(g) ΔH = –808 kJ mol−1 When Kc < 1, ΔG ⊖reaction < 0 Possible function: ΔG ⊖reaction = –AlnKc where A is a constant with units kJ mol−1. (2)–(1) 2H2O(l) → 2H2O(g) ΔH = 891 – 808 = +83 kJ mol−1 H2O(l) → H2O(g) The precise relationship discussed in Chapter 7 is ΔG⊖reaction = –RTlnKc ΔH = +41.5 kJ mol−1 There are (on average) two hydrogen bonds between each molecule so a hydrogen bond is approximately 20 kJ mol−1. This assumes that all other molecular interactions such as dipole–dipole and London forces are negligible, which is an approximation. 5 Within the sheets of graphite the C=C bond order 1.33 and the coordination number is 3, and there are weak intermolecular forces Practice questions 1 D 2 D 3 A 4 C 5 B 6 C 7 B 8 B 9 (a) amount of energy required to break bonds of reactants 26 6 10:01 3 × 414 + 358 + 463 + 1.5 × 498 (kJ mol−1) [1] = 2810 (kJ mol−1) density of water/solution = 1.0 / density of solution = density of water; amount of energy released during bond formation of products heat capacity of cup is zero / no heat is absorbed by the cup; 4 × 463 + 2 × 804 (kJ mol−1) = 3460 (kJ mol−1) [1] specific heat capacity of solution = specific heat capacity of water; ∆H = 2810 – 3460 = –650 (kJ mol−1) [1] temperature uniform throughout solution; Award [3] for correct final answer. Award [2] for (+)650. (b) (i) m(methanol) = 80.557 – 80.034 = 0.523(g) 0.523 g n(methanol) = = 32.05 g mol−1 0.0163 (mol) Award [1] each for any two. Accept ‘energy’instead of ‘heat’ [1] ∆T = 48.2 (°C) [1] Allow in the range 47 to 49 (°C). Award [2] for correct final answer. Allow ECF if Tfinal or Tinitial correct. [1] [1] q = (mc∆T =) 20.000 × 4.18 × 4.9 (J) or [1] 20.000 × 4.18 × 4.9 × 10−3 (kJ) (ii) temperature decreases at uniform rate (when above room temperature) / OWTTE [1] = 410 J or 0.41 kJ (iii) 10.1 (kJ) [1] Award [3] for correct final answer. 410 (J) or (iii) ∆H⊖c = – 0.0163 (mol) 0.41 (kJ) – [1] 0.0163 (mol) = –25153 J mol−1 or –25 kJ mol−1 [1] (c) (i) bond enthalpies are average values/ differ (slightly) from one compound to another (depending on the neighbouring atoms) / methanol is liquid not gas in thereaction [1] (ii) not all heat produced transferred to water / heat lost to surroundings/ environment / OWTTE / incomplete combustion (of methanol) / water forms as H2O(l) instead of H2O(g) [Do not allow just ‘heat is lost’] [1] (a) all heat is transferred to water/copper sulfate solution / no heat loss; specific heat capacity of zinc is zero/ negligible / no heat is absorbed by the zinc; [1] Allow in the range 9.9 to 10.2 (kJ). (c) Complete colour change shows all the copper has reacted, so n(Zn) = n(CuSO4) 1.00 × 50.0 = 0.0500 (mol) [1] = 1000 −1 [1] (d) –201 kJ mol Award [2] for correct final answer. Award [1] for (+)25 (kJ mol –1). 10 [1] Allow in the range 72 to 74 (°C). Award [2] for correct final answer. (ii) ∆T = 26.4 – 21.5 = 4.9 (K) [2] (b) (i) Tfinal = 73.0 (°C) Allow in the range –197 to –206 (kJ mol−1). Value must be negative to award mark. 11 (a) energy required = C= C + H–H = 614 + 436 = 1050 energy released = C–C + 2(C–H) = 346 + 2(414) = 1174 [1] Allow full consideration of breaking all bonds and forming all the new bonds, which gives values of 2706 and 2830. energy required = C=C + H–H + 4(C– H)/612 + 436 + 4(413) and energy released = C–C + 6(C–H)/347 + 6(413); ∆H = (1050 – 1174) or (2706 – 2830) = –124 kJ mol−1 [1] 27 7 10:01 Answers (b) ∆H = –1411 + (–286) – (–1560) = –137 kJ mol−1 (d) oxide has greater charge [1] oxide has smaller radius (c) the actual values for the specific bonds may be different to the average values / the combustion values referred to the specific compounds / OWTTE [1] Accept opposite arguments. (d) (i) –124 kJ mol−1 22 [1] 12 (c) ∆S = 270 – (267 + 131) [2] bonds formed: 1 × N≡N, 4 × O–H = –2797 (kJmol−1) [1] enthalpy change = 2797 + 2220 = –577 kJmol−1 [1] 15 A 16 C 18 B 19 B 20 B 21 (a) I is atomization/sublimation (of Mg) / ∆H⊖atomization(Mg) / ∆H⊖sublimation(Mg) 17 (d) ∆G = ∆H – T∆S = –124.4 – = –86.3 kJ mol−1 (e) find the temperature for which ∆G = ∆H – T∆S = 0 / ∆H = T∆S [1] –124.4 T= = 972 K / 699 °C [1] –128 / 1000 (b) Energy value for II is +243 23 [1] [1] Energy value for IV is 2 × (–349) [1] ∆H⊖lat(MgCl2) = 642 + 148 + 243 + 2189 =(+)2252 kJ [1] (c) theoretical value assumes ionic model (a) ∆H⊖reaction = Σ∆H⊖f (products) – Σ∆H ⊖f (reactants) = (1 × –84 + 2 × –242) – (2 × –201) [1] = –166 (kJ or kJ mol−1) [1] Award [1] for (+) 167. Energy value for III: is 738 + 1451 = 2189 [1] experimental value greater due to (additional)covalent character Only penalize incorrect units for T and inconsistent ΔS value once in parts (d) and (e). D V is enthalpy change of formation of (MgCl2) / ∆H ⊖formation(MgCl2) (–128 × 298) [1] 1000 [1] Units needed for the mark. Award [2] for correct final answer. Allow ECF if only one error in first marking point. [1] [1] [1] Award [1] for +128 J K−1 mol−1, award [2] for correct final answer. Do not accept stronger/weaker bonding without justification for the second marking point. A [1] = –128 J K mol−1 O2 has double bond/bond order 2 and O3 intermediate between double and single bonds/ bond order of 121 [1] 14 [1] Award [1] for +124.4 kJ mol−1, award [2] forcorrect final answer. bonds broken: 4 × N–H, 1 × N–N, 1 × O=O [1] =+2220 (kJ mol−1) reaction II (requires a shorter wavelength) [1] [1] = –124.4 kJ mol−1 Award [3] for correct final answer. 13 (a) by definition ∆H⊖f of elements (in their standard states) is zero / no reaction is involved / OWTTE (b) ∆H = –104 – (+20.4) (ii) average bond enthalpies do not apply tothe liquid state / OWTTE; [1] the enthalpy of vaporization/ condensation of cyclohexene and cyclohexane / OWTTE [1] [1] [1] [1] (b) ∆S⊖reaction = ΣS⊖(products) – ΣS ⊖(reactants) = (1 × 230 + 2 × 189) – (2 × 238 + 1 × 131) [1] = +1 (J K−1 or J K−1 mol−1) [1] (c) ∆G⊖reaction = ∆H ⊖ – T∆S⊖ = –166 – 298 × 0.001 [1] Award [1] for correct substitution of values. = –167 kJ or –167000 J [1] Units needed for mark in (c) only. Accept –167 kJ mol–1 or –167000 J mol–1. reaction is spontaneous [1] 28 8 10:01