University:
California State University, Northridge
Course:
PHYS 100B | General Physics II
Academic year:

2008
Views:

302

Pages:

9
Author:

keniaeveyik

23-1 Induced Electromotive Force (emf) Michael Faraday’s Experimentation: Magnetic induction When the switch is closed on: 1) Magnetic field increase/rise. 2) The ammeter deflects. 3) As long as the current (primary circuit) is constant, the ammeter is zero. When the switch is open: Figure 23-1 M Magnetic i Induction I d i How magnetic field create emf. 1) The ammeter deflects in opposite direction. 2) Then return to zero. Summary: • The current in the secondary circuit is zero if the current in the primary circuit is constant. • When the magnetic field in the second coil increases, a current is observed in the secondary circuit; • when the magnetic field in the second circuit decreases, a current is observed but in the opposite direction. The secondary current is called induced current, since there is no direct contaction between the two circuits. We also say the changing of magnetic field creates an induced emf (electromotive force) in the secondary circuit. Other ways to create a changing of magnetic field: Figure 23-2 Induced Current Produced by a Moving Magnet (a) Magnet moves toward the coil, the current is in one direction. (b) No current is induced while the magnet is held still. (c) Magnet is pulled away from the coil, the current is in an opposite direction. 23-2 Magnetic Flux Figure 23-3 The Magnetic Flux Through a Loop Case A: Magnetic flux Φ = BA Case B: Φ=0 Case C: Φ = B A cosθ , suitable for any case Definition of Magnetic Flux, Φ Φ = B A cosθ SI unit: 1 T·m2 = 1 weber = 1 Wb (23-1) Example 23-1 A system in Flux Consider a circular loop with a 2.50-cm radius in a constant magnetic field of 0.625 T. Find the magnetic flux through this loop when its normal makes an angle of (a) 0˚, (b) 30.0˚, (c) 60.0˚, and (d) 90˚. Picture the problem Example 23-1 Your Turn 7) A Solenoid with 375 turns per meter and a diameter of 15.0 cm has a magnetic flux through its core of magnitude 12.8x10-4 T⋅m2. Find the current in the solenoid. Hint: B = μ0 ( N ) I = μ 0 nI L Where μ0 = 4π x 10-7 T.m /A (22 − 12) Summary 1) Induced Electromotive Force (emf) A changing magnetic field induced a current. 2) Definition of Magnetic Flux, Φ Φ = B A cosθ (23-1) Your ou Turn u 3) A magnetic field is oriented at an angle of 32º to the normal of a rectangle area 5.5 cm by 7.2 cm. If the magnitude flux through this surface has a magnitude of 4.4x10-5 T⋅ m2, what is the strength of the magnetic field? Solution Since Φ = B A cosθ, B= Φ / ( A cosθ) = 4.4x10-5 T⋅ m2 / (0.052m x0.072m cos32º) = 1.4 x10-2 T