Chapter 8 Indices and Tables

CHAPTER 8 Indices and tables • genindex • modindex • search pySerial Documentation, Release 3.4 Chapter 8. Indices and tables Python Module Index s serial, 37 serial.threaded, 26 serial.tools.list_ports, 31 serial.tools.miniterm, 33 pySerial Documentation, Release 3.4 Python Module Index Index Symbols D __del__() (serial.Serial method), 13 __enter__() (serial.Serial method), 18 __enter__() (serial.threaded.ReaderThread method), 28 __exit__() (serial.Serial method), 19 __exit__() (serial.threaded.ReaderThread method), 28 __init__() (serial.Serial method), 11 __init__() (serial.rfc2217.PortManager method), 23 __init__() (serial.threaded.Packetizer method), 27 __init__() (serial.threaded.ReaderThread method), 28 apply_settings() (serial.Serial method), 18 applySettingsDict() (serial.Serial method), 21 data_received() (serial.threaded.Packetizer method), 27 data_received() (serial.threaded.Protocol method), 27 delay_before_rx (serial.rs485.RS485Settings attribute), 22 delay_before_tx (serial.rs485.RS485Settings attribute), 22 description (serial.tools.list_ports.ListPortInfo attribute), 32 device (serial.tools.list_ports.ListPortInfo attribute), 32 device() (in module serial), 25 dsr (serial.Serial attribute), 15 dsrdtr (serial.Serial attribute), 17 dtr (serial.Serial attribute), 14 B E baudrate (serial.Serial attribute), 15 BAUDRATES (serial.Serial attribute), 17 break_condition (serial.Serial attribute), 14 bytesize (serial.Serial attribute), 15 BYTESIZES (serial.Serial attribute), 17 EIGHTBITS (in module serial), 25 escape() (serial.rfc2217.PortManager method), 24 A C cancel_read() (serial.Serial method), 19 cancel_write() (serial.Serial method), 20 cd (serial.Serial attribute), 15 check_modem_lines() (serial.rfc2217.PortManager method), 24 close() (serial.Serial method), 12 close() (serial.threaded.ReaderThread method), 28 comports() (in module serial.tools.list_ports), 31 connect() (serial.threaded.ReaderThread method), 28 connection_lost() (serial.threaded.Packetizer method), 27 connection_lost() (serial.threaded.Protocol method), 27 connection_made() (serial.threaded.Packetizer method), 27 connection_made() (serial.threaded.Protocol method), 26 cts (serial.Serial attribute), 15 F fileno() (serial.Serial method), 19 filter() (serial.rfc2217.PortManager method), 24 FIVEBITS (in module serial), 25 flowControlOut() (serial.Serial method), 21 flush() (serial.Serial method), 13 flushInput() (serial.Serial method), 20 flushOutput() (serial.Serial method), 20 G get_settings() (serial.Serial method), 18 getCD() (serial.Serial method), 21 getCTS() (serial.Serial method), 20 getDSR() (serial.Serial method), 20 getRI() (serial.Serial method), 20 getSettingsDict() (serial.Serial method), 21 grep() (in module serial.tools.list_ports), 31 H handle_line() (serial.threaded.LineReader method), 27 pySerial Documentation, Release 3.4 handle_packet() (serial.threaded.LineReader method), 27 handle_packet() (serial.threaded.Packetizer method), 27 hwid (serial.tools.list_ports.ListPortInfo attribute), 32 readable() (serial.Serial method), 17 ReaderThread (class in serial.threaded), 28 readinto() (serial.Serial method), 18 readline() (serial.Serial method), 18 readlines() (serial.Serial method), 18 I reset_input_buffer() (serial.Serial method), 14 in_waiting (serial.Serial attribute), 13 reset_output_buffer() (serial.Serial method), 14 inter_byte_timeout (serial.Serial attribute), 16 RFC interCharTimeout (serial.Serial attribute), 20 RFC 2217, 22–24, 26, 33, 37, 38, 44, 45, 49, 50 interface (serial.tools.list_ports.ListPortInfo attribute), 32 RFC 2271, 38 inWaiting() (serial.Serial method), 20 rfc2217.PortManager (class in serial), 23 is_open (serial.Serial attribute), 15 rfc2217.Serial (class in serial), 22 isOpen() (serial.Serial method), 20 ri (serial.Serial attribute), 15 iterbytes() (in module serial), 26 rs485.RS485 (class in serial), 22 rs485.RS485Settings (class in serial), 21 L rs485_mode (serial.Serial attribute), 17 LineReader (class in serial.threaded), 27 rts (serial.Serial attribute), 14 ListPortInfo (class in serial.tools.list_ports), 32 location (serial.tools.list_ports.ListPortInfo attribute), 32 rts_level_for_rx (serial.rs485.RS485Settings attribute), 22 loopback (serial.rs485.RS485Settings attribute), 22 rts_level_for_tx (serial.rs485.RS485Settings attribute), 22 M rtscts (serial.Serial attribute), 16 manufacturer (serial.tools.list_ports.ListPortInfo atrtsToggle (serial.Serial attribute), 21 tribute), 32 run() (serial.threaded.ReaderThread method), 28 N name (serial.Serial attribute), 15 name (serial.tools.list_ports.ListPortInfo attribute), 32 nonblocking() (serial.Serial method), 19 O open() (serial.Serial method), 12 out_waiting (serial.Serial attribute), 14 outWaiting() (serial.Serial method), 21 P Packetizer (class in serial.threaded), 27 PARITIES (serial.Serial attribute), 17 parity (serial.Serial attribute), 16 PARITY_EVEN (in module serial), 25 PARITY_MARK (in module serial), 25 PARITY_NONE (in module serial), 25 PARITY_ODD (in module serial), 25 PARITY_SPACE (in module serial), 25 pid (serial.tools.list_ports.ListPortInfo attribute), 32 port (serial.Serial attribute), 15 portstr (serial.Serial attribute), 20 product (serial.tools.list_ports.ListPortInfo attribute), 32 Protocol (class in serial.threaded), 26 protocol_handler_packages (in module serial), 26 R read() (serial.Serial method), 13 read_until() (serial.Serial method), 13 S seekable() (serial.Serial method), 17 send_break() (serial.Serial method), 14 sendBreak() (serial.Serial method), 20 Serial (class in serial), 11 serial (module), 11, 31, 37 serial.threaded (module), 26 serial.tools.list_ports (module), 31 serial.tools.miniterm (module), 33 serial_for_url() (in module serial), 25 serial_number (serial.tools.list_ports.ListPortInfo attribute), 32 SerialException, 24 SerialTimeoutException, 24 set_input_flow_control() (serial.Serial method), 19 set_output_flow_control() (serial.Serial method), 19 setBreak() (serial.Serial method), 20 setDTR() (serial.Serial method), 20 setRTS() (serial.Serial method), 20 setXON() (serial.Serial method), 21 SEVENBITS (in module serial), 25 SIXBITS (in module serial), 25 stop() (serial.threaded.ReaderThread method), 28 STOPBITS (serial.Serial attribute), 17 stopbits (serial.Serial attribute), 16 STOPBITS_ONE (in module serial), 25 STOPBITS_ONE_POINT_FIVE (in module serial), 25 STOPBITS_TWO (in module serial), 25 Index pySerial Documentation, Release 3.4 T timeout (serial.Serial attribute), 16 to_bytes() (in module serial), 26 V VERSION (in module serial), 25 vid (serial.tools.list_ports.ListPortInfo attribute), 32 W writable() (serial.Serial method), 17 write() (serial.Serial method), 13 write() (serial.threaded.ReaderThread method), 28 write_line() (serial.threaded.LineReader method), 27 write_timeout (serial.Serial attribute), 16 writelines() (serial.Serial method), 18 writeTimeout (serial.Serial attribute), 20 X XOFF (in module serial), 25 XON (in module serial), 25 xonxoff (serial.Serial attribute), 16 Index