Introduction to Packet Tracer

25/5/2021 Course Introduction to Packet Tracer - PT IoT Basics Quiz: Attempt review Introduction to Packet Tracer Home Started on Tuesday, 25 May 2021, 8:10 PM State Finished Grades Completed on Tuesday, 25 May 2021, 8:17 PM Time taken 7 mins 3 secs Marks 22.00/24.00 Messages Grade 91.67 out of 100.00 Question 1 Calendar Correct Mark 2.00 out of 2.00 A network administrator is using Packet Tracer to mock up a network that includes IoT devices. What can the administrator do from the Physical tab of any IoT device? Select one: Change the power supply. Change pin connections. Increase or decrease wattage. Turn the device on or off. Refer to curriculum topic: 5.1.1 Within Packet Tracer, the Physical tab allows access to available modules and power connections. This is where you could power the device off or on. The correct answer is: Turn the device on or off. Question 2 What must be done to activate the Registration Server? Correct Mark 2.00 out of 2.00 Select one: Nothing it is activated by default. Under the Services tab you need to turn on the IoT Registration Server. Sign in to the server web browser and activate the server. Click on the Registration tab and then look for IoT button. Refer to curriculum topic: 6.2.1 To activate the registration server, it needs to be turned on from the Services tab. The correct answer is: Under the Services tab you need to turn on the IoT Registration Server. Question 3 Correct Mark 2.00 out of 2.00 What two methods can be used to access and modify an existing program that is running on an IoT device in Cisco Packet Tracer? (Choose two.) Select one or more: Click on the device then select the Programming tab. Go to the home gateway, then select the Editor tab prior to logging in. Go to the registration server and login. Then select the Editor tab. Click on the device, then go to the Thing Editor tab. Click on the device and then click on the Attributes tab. Refer to curriculum topic: 8.2.1 The program running on an existing IoT device can be modified by the following: Going to the registration server and logging in, then select the Editor tab. Clicking on the device, then selecting the Programming tab. The correct answers are: Click on the device then select the Programming tab., Go to the registration server and login. Then select the Editor tab. 1/4 25/5/2021 Introduction to Packet Tracer - PT IoT Basics Quiz: Attempt review Question 4 What are the differences between the registration server and the home gateway? (Choose three.) Correct Mark 2.00 out of 2.00 Select one or more: There is no remote login for the home gateway. The home gateway has more IoT items than the registration server. You need to create a username and password on the registration server. You can login remotely via a web browser if you use the registration server. The default username and password for the registration server is cisco. Refer to curriculum topic: 6.2.1 The correct answers are: There is no remote login for the home gateway., You need to create a username and password on the registration server., You can login remotely via a web browser if you use the registration server. Question 5 Which two devices are used to connect IoT devices to a home network? Incorrect Mark 0.00 out of 2.00 Select one or more: Cisco 2960 switch DNS server  Cisco 2911 router home gateway registration server Refer to curriculum topic: 5.1.1 IoT devices such as an air conditioner, ceiling fan, coffee maker, and CO detector can connect to a network wired or wirelessly using a home gateway or registration server. The correct answers are: home gateway, registration server Question 6 Within the Keyframe Graph workspace, what must be done to add a keyframe event to the environment? (Choose three.) Correct Mark 2.00 out of 2.00 Select one or more: Select the environment element. Click on the endpoint of the line. Double click on the environment element line. Move the point on the line to a different value. Select all environment elements. Refer to curriculum topic: 7.1.1 The correct answers are: Select the environment element., Double click on the environment element line., Move the point on the line to a different value. Question 7 How will a Packet Tracer environment be affected if a heater is added to a container named Branch Office and turned on? Correct Mark 2.00 out of 2.00 Select one: The temperature inside Branch Office will increase along with all containers in Packet Tracer. The temperature inside Branch Office will increase along with any child containers that exist within Branch Office. The temperature inside Branch Office will increase, and child containers within it will not be affected. The temperature inside the Branch Office container will increase along with the parent container. Refer to curriculum topic: 7.1.1 For deploying a heater within a container in Packet Tracer, that container and any corresponding child containers will be affected by the heater. The correct answer is: The temperature inside Branch Office will increase along with any child containers that exist within Branch Office. 2/4 25/5/2021 Introduction to Packet Tracer - PT IoT Basics Quiz: Attempt review Question 8 Correct Mark 2.00 out of 2.00 Refer to the exhibit. A student wants to create a smart home network in Packet Tracer. Which icon would the user select in order to select an IoT thing such as a water level monitor or a smart fan? Select one: A B C D E F Refer to curriculum topic: 2.1.1 The second icon from the left, labeled B, is used to add end devices, including IoT devices, to the home network environment. The correct answer is: B Question 9 Here is a link to the PT Activity. Correct Open the PT Activity. Perform the tasks in the activity instructions and then answer the question. Mark 2.00 out of 2.00 A technician is trying to use the tablet to control the IoT device Digital Lamp. However, the device is not displayed on the home gateway. What is the problem? Select one: The web service in the home gateway is off. The digital lamp is not registered to the home gateway. The home gateway is not connected to the Internet. The digital lamp is configured with an incorrect IP address. Refer to curriculum topic: 6.1.1 IoT devices registered on a registration server will allow remote control. The correct answer is: The digital lamp is not registered to the home gateway. Question 10 What three programming languages are available within Packet Tracer to program a thing? (Choose three.) Correct Mark 2.00 out of 2.00 Select one or more: JavaScript IOS C++ Python Visual Blockly Ruby Refer to curriculum topic: 8.2.1 Packet Tracer provides programming language support for JavaScript, Python, and Visual Blocky. The correct answers are: JavaScript, Python, Visual Blockly 3/4 25/5/2021 Introduction to Packet Tracer - PT IoT Basics Quiz: Attempt review Question 11 Here is a link to the PT Activity. Correct Open the PT Activity. Perform the tasks in the activity instructions and then answer the question. Mark 2.00 out of A technician is trying to use the tablet to control the IoT device Digital Lamp. The technician tries to login to the registration server with username admin2 and password admin2. However, the access is not successful. What are two problems? (Choose two.) 2.00 Select one or more: The registration service on the server is off. The technician is using the wrong credential to login. The home gateway is not connected to the Internet. The digital lamp is using the wrong credential to connect to the registration server. The device is registered to the home gateway, not the registration server. Refer to curriculum topic: 6.2.1 When an IoT devices registers on a registration server, it requires a correct credential, which is created on the server. By default, the IoT registration service on the server is off. The correct answers are: The registration service on the server is off., The digital lamp is using the wrong credential to connect to the registration server. Question 12 Which two steps must be followed in order to view a working graph or chart of environmental changes? (Choose two.) Correct Mark 2.00 out of 2.00 Select one or more: Choose the Always on Top box. Be in View Mode Pause the current time. Select an environment element. Select the InterCity container. Refer to curriculum topic: 7.1.1 In order to see a working graph or chart of environmental changes, a user must be in View mode and then choose an environment element. The correct answers are: Be in View Mode, Select an environment element. ◄ Read Chapter 8: Creating and Programming Objects in PT Jump to... End of Course Feedback ► 4/4