University:
University of Houston
Course:
PHYS 4356 | Particle and Nuclear Physics
Academic year:

2022
Views:

401

Pages:

9
Author:

Brendon Freeman

< #> C. The test parameters for CAT 6 are defined in TIA CAT 6 standard. The test of each link is to contain all of the following parameters as detailed below. In order to pass the test all measurements (at each frequency in the range from 1 MHz through 250 MHz) must meet or exceed the limit value determined in the above‐ mentioned standard. 1. Wire Map a. Length b. Insertion Loss (Attenuation) c. NEXT Loss d. PSNEXT Loss e. ELFEXT Loss, pair‐to‐pair f. PSELFEXT Loss g. Return Loss h. ACR (Attenuation to crosstalk ratio) i. PSACR j. Propagation Delay k. Delay Skew [as defined in TIA/EIA‐568‐B.1; Section 11.2.4.11] END OF SECTION 27 1500 AE Project #: <> 27 1500 ‐ 8 UH Master: 03.2020 < #> SECTION 27 1619 – PATCH CORDS, STATION CORDS AND CROSS‐CONNECT CABLES Revise this Section by deleting and inserting text to meet Project‐specific requirements. This Section uses the term "Architect" or “Engineer.” Change this term to match that used to identify the design professional as defined in the General and Supplementary Conditions. Verify that Section titles referenced in this Section are correct for this Project's Specifications; Section titles may have changed. Delete hidden text after this Section has been edited for the Project. PART 1 ‐ GENERAL 1.1 A. RELATED DOCUMENTS The Contractor's attention is specifically directed, but not limited, to the following documents for additional requirements: 1. 2. 3. 1.2 The current version of the Uniform General Conditions for Construction Contracts, State of Texas available on the web site of the Texas Facilities Commission. The University of Houston’s Supplemental General Conditions and Special Conditions for Construction. The University of Houston Network Infrastructure Design Standards (available at https://uh.edu/infotech/services/computing/networks/network‐infra‐standards/). SUMMARY A. Section Includes: 1. 2. 3. 4. 5. B. Coordination with other trades and parts of the contract. Submittals (Action and Informational). Quality Assurance. Parts and Manufacturers. Installation and Testing. This section covers the cables used to provide connections to horizontal cables that transport signal between network distribution equipment and between such equipment and end‐user hardware. Revise subparagraph(s) below to suit Project. 1.3 PREINSTALLATION MEETINGS A. Preconstruction Conference: Conduct conference at [Project site] . The Contractor and the Facilities Project Manager lead the meeting. The UIT Project Manager must be invited to the preinstallation meetings. Copy subparagraph below and edit for each activity required for preconstruction conference. AE Project #: <> 27 1619 ‐ 1 UH Master: 03.2020 < #> 1. 1.4 . SUBMITTAL ADMINISTRATIVE REQUIREMENTS A. 1.5 Follow the Submittal Administrative Requirements as stated in Section 01 3300 Submittal Procedures. For submittals to UIT, use electronic format only. ACTION SUBMITTALS A. 1.6 None. INFORMATIONAL SUBMITTALS A. Product Data: For each type of product. PART 2 ‐ PRODUCTS 2.1 PARTS AND MANUFACTURERS A. Refer to Section 01 2500 Substitution Procedures for variations from approved manufacturers or parts. Obtain written approval from UITNS before requesting a substitution for work covered by Division 27 Communications. B. Copper Cables 1. Panduit a. b. c. d. e. f. g. 3‐foot UTPSP3 5‐foot UTPSP5 7‐foot UTPSP7 10‐foot UTPSP10 14‐foot UTPSP14 20‐foot UTPSP20 Colors: Above part numbers are off white. Append the following to part numbers to designate color. 1) 2) 3) 4) 5) 6) 2. BL = Black BU = Blue RD = Red YL = Yellow VL = Violet OR = Orange CommScope a. b. c. AE Project #: <> 3‐foot 5‐foot 7‐foot UNC6‐xx‐3F UNC6‐xx‐5F UNC6‐xx‐7F 27 1619 ‐ 2 UH Master: 03.2020 < #> d. e. f. g. 10‐foot UNC6‐xx‐10F 14‐foot UNC6‐xx‐15F 20‐foot UNC6‐xx‐20F xx = Color Designation. Replace xx in part numbers to designate color as follows: 1) 2) 3) 4) 5) 6) C. BK = Black BL = Blue RD = Red YL = Yellow VL = Violet OR = Orange Fiber Optic Cables 1. CommScope or Corning a. b. Single‐mode: Fiber Optic Patch Cords with LC connectors – yellow Multimode: Fiber Optic Patch Cords with ST connectors – orange PART 3 ‐ EXECUTION 3.1 General Installation A. Cabling Contractor shall fully cooperate and coordinate with Owner's Voice and Data Communications Equipment providers as required to ensure proper integration and connectivity between systems. B. Cabling Contractor shall furnish and install all patch cords in conjunction with Owner's Voice and Data Communications Equipment providers. C. Cabling Contractor shall provide adequate technician support when Owner's Voice and Data Communications Equipment providers are planning and installing new voice and data equipment installation and connectivity. D. Field terminated patch cables are strictly prohibited. E. Label copper and fiber optic patch cables as described in 27 0553 Identification for Communications Systems. 3.2 Copper Cable A. Furnish and install two Category 6 copper patch cables (one 5 feet in length and one 7 feet in length) for each horizontal cable installed. B. Take care to protect the minimum bend radius of 4 times the cable diameter on all copper patch cables. AE Project #: <> 27 1619 ‐ 3 UH Master: 03.2020 < #> C. Assure that, at minimum, every horizontal cabling permanent link in the installation meets or exceeds performance characteristics of the field test specifications defined in ANSI/TIA‐568.2‐D Balanced Twisted‐Pair Telecommunications Cabling and Components Standard. D. Copper Patch Cable Color: 1. 2. 3. 4. 5. E. 3.3 Blue Yellow Violet Green White General purpose, office or lab connection Wireless access point connection Security camera, Security device, door lock or Code Blue phone EMECS system connection AV Connect all wireless (WAP) jacks to a gigabit port with Power over Ethernet (802.at) on a dedicated HPE switch for wireless devices. Fiber Optic Cable A. Provide one duplex LC Fiber optic patch cable for every fiber optic strand terminated. B. Patch cables are to be of like type and connector to the terminated fiber optic cable type. C. Length is to be determined at installation and recorded in submittal documents. Make the cable length adequate to reach owner provided electronic equipment mounted in lower section of relay rack. D. Fiber Optic Patch Cable Color: 1. 2. Yellow: Single‐mode Orange: Multi‐mode END OF SECTION 27 1619 AE Project #: <> 27 1619 ‐ 4 UH Master: 03.2020 < #> SECTION 27 2000 – DATA COMMUNICATIONS EQUIPMENT PART 1 ‐ GENERAL Revise this Section by deleting and inserting text to meet Project‐specific requirements. This Section uses the term “Architect” or “Engineer.” Change this term to match that used to identify the design professional as defined in the General and Supplementary Conditions. Verify that Section titles referenced in this Section are correct for this Project's Specifications; Section titles may have changed. Delete hidden text after this Section has been edited for the Project. 1.1 RELATED DOCUMENTS A. The Contractor's attention is specifically directed, but not limited, to the following documents for additional requirements: 1. 2. 3. 1.2 The current version of the Uniform General Conditions for Construction Contracts, State of Texas available on the web site of the Texas Facilities Commission. The University of Houston’s Supplemental General Conditions and Special Conditions for Construction. The University of Houston’s Network Infrastructure Design Standards (available at https://uh.edu/infotech/services/computing/networks/network‐infra‐standards/). SUMMARY A. This Section specifies the requirements for the Data Communications Equipment for the University of Houston [Project Name] [Insert Project description]. B. Data Communications Equipment Includes: 1. 2. 1.3 Customer owned routers, servers, Ethernet switches, personal computers, printers, wireless access points, etc. required to connect the Academic Wing to the rest of the campus, the internet and the public switched telephone network (PSTN). Data Communications Equipment will be Owner Furnished Contractor Installed (OFCI). PREINSTALLATION MEETINGS A. Preconstruction Conference: Conduct conference at [Project site] . The Contractor and the Facilities Project Manager lead the meeting. The UIT Project Manager must be invited to the Preinstallation meetings. Copy subparagraph below and edit for each activity required for preconstruction conference. 1. . AE Project #: <> 27 2000‐ 1 UH Master: 03.2020 < #> 1.4 SUBMITTAL ADMINISTRATIVE REQUIREMENTS A. 1.5 Follow the Submittal Administrative Requirements as stated in Section 01 3300 Submittal Procedures. For submittals to UIT, use electronic format only. ACTION SUBMITTALS A. 1.6 None. INFORMATIONAL SUBMITTALS A. Contractor must furnish labeled floor plan and Excel run sheet to University Information Technology Network Services (UITNS) two weeks prior to occupancy. PART 2 ‐ PRODUCTS The paragraph and subparagraphs in this Article demonstrate the line spacing format for subparagraphs not subordinate to the preceding subparagraph. 2.1 Not Applicable. PART 3 ‐ EXECUTION 3.1 COORDINATION A. Contractor shall fully cooperate and coordinate with UITNS as required to ensure proper integration and connectivity between systems. B. Contractor shall furnish and install all patch cords in conjunction with UITNS’ Work. C. Contractor shall provide adequate technical support to UITNS during planning, installation and connectivity of new voice and data equipment. D. Contractor shall provide adequate technician support first business day after data equipment installation and connectivity. END OF SECTION 27 2000 AE Project #: <> 27 2000‐ 2 UH Master: 03.2020 < #> SECTION 27 3000 – VOICE COMMUNICATIONS EQUIPMENT PART 1 ‐ GENERAL Revise this Section by deleting and inserting text to meet Project‐specific requirements. This Section uses the term “Architect” or “Engineer.” Change this term to match that used to identify the design professional as defined in the General and Supplementary Conditions. Verify that Section titles referenced in this Section are correct for this Project's Specifications; Section titles may have changed. Delete hidden text after this Section has been edited for the Project. 1.1 RELATED DOCUMENTS A. The Contractor's attention is specifically directed, but not limited, to the following documents for additional requirements: 1. 2. 3. 1.2 The current version of the Uniform General Conditions for Construction Contracts, State of Texas available on the web site of the Texas Facilities Commission. The University of Houston’s Supplemental General Conditions and Special Conditions for Construction. The University of Houston’s Network Infrastructure Design Standards (available at https://uh.edu/infotech/services/computing/networks/network‐infra‐standards/). SUMMARY A. This section specifies the requirements for the Voice Communications Equipment for the University of Houston [Project Name] [Insert Project description]. B. Voice Communications Equipment includes: 1. 2. 1.3 Customer owned phones, faxes, etc. required to connect the [Project Name] to the rest of the campus and the public switched telephone network (PSTN). Voice Communications Equipment will be Owner Furnished Contractor Installed (OFCI). PREINSTALLATION MEETINGS A. Preconstruction Conference: Conduct conference at [Project site] . The Contractor and the Facilities Project Manager lead the meeting. The UIT Project Manager must be invited to the Preinstallation meetings. Copy subparagraph below and edit for each activity required for preconstruction conference. 1. . AE Project #: <> 27 3000‐ 1 UH Master: 03.2020 < #> 1.4 SUBMITTAL ADMINISTRATIVE REQUIREMENTS A. 1.5 Follow the Submittal Administrative Requirements as stated in Section 01 3300 Submittal Procedures. For submittals to UIT, use electronic format only. ACTION SUBMITTALS A. 1.6 None. INFORMATIONAL SUBMITTALS A. Contractor must furnish labeled floor plan and Excel run sheet to University Information Technology Network Services (UITNS) two weeks prior to occupancy. PART 2 ‐ PRODUCTS The paragraph and subparagraphs in this Article demonstrate the line spacing format for subparagraphs not subordinate to the preceding subparagraph. 2.1 Not Applicable. PART 3 ‐ EXECUTION 3.1 COORDINATION A. Contractor shall fully coordinate with UITNS as required to ensure proper integration and connectivity between systems. B. Contractor shall furnish and install all patch cords in conjunction with UITNS. C. Contractor shall provide adequate technician support during planning, installation and connectivity of new voice and data equipment by UITNS. D. Contractor shall provide adequate technician support first business day after Voice equipment installation and connectivity. END OF SECTION 27 3000 AE Project #: <> 27 3000‐ 2 UH Master: 03.2020

Communications General Provisions Ch9

Related Documents

Recommended Documents

Description

Related Documents

Free up your schedule!

Take 5 seconds to unlock