University:
Eastern Kentucky University
Course:
CSC 101 | The World of Code
Academic year:

2019
Views:

84

Pages:

6
Author:

emplanasf3fe

Packet Tracer - Skills Integration Challenge Topology Addressing Table Device Interface IP Address Subnet Mask Default Gateway G0/0 172.16.127.254 255.255.192.0 G0/1 172.16.63.254 255.255.192.0 N/A S0/0/0 192.168.0.1 255.255.255.252 N/A S0/0/1 64.104.34.2 255.255.255.252 64.104.34.1 G0/0 172.16.159.254 255.255.240.0 N/A G0/1 172.16.143.254 255.255.240.0 N/A S0/0/0 192.168.0.2 255.255.255.252 N/A HQ1 NIC 172.16.64.1 255.255.192.0 172.16.127.254 HQ2 NIC 172.16.0.2 255.255.192.0 HQ Branch HQServer.pka NIC 172.16.0.1 255.255.192.0 B1 NIC 172.16.144.1 255.255.240.0 B2 NIC 172.16.128.2 255.255.240.0 BranchServer.pka NIC 172.16.128.1 255.255.240.0 N/A 172.16.63.254 172.16.63.254 172.16.159.254 172.16.143.254 172.16.143.254 Scenario In this challenge activity, you will finish the addressing scheme, configure routing, and implement named access control lists. Page 1 of 6 Packet Tracer - Skills Integration Challenge Requirements a. Divide 172.16.128.0/19 into two equal subnets for use on Branch. 1) Assign the last usable address of the second subnet to the Gigabit Ethernet 0/0 interface. 2) Assign the last usable address of the first subnet to the Gigabit Ethernet 0/1 interface. 3) Document the addressing in the Addressing Table. 4) Configure Branch with appropriate addressing b. Configure B1 with appropriate addressing using the first available address of the network to which it is attached. Document the addressing in the Addressing Table. c. Configure HQ and Branch with RIPv2 routing according to the following criteria: Advertise all three attached networks. Do not advertise the link to the Internet. Configure appropriate interfaces as passive. Page 2 of 6 Packet Tracer - Skills Integration Challenge d. Set a default route on HQ which directs traffic to S0/0/1 interface. Redistribute the route to Branch. e. Design a named access list HQServer to prevent any computers attached to the Gigabit Ethernet 0/0 interface of the Branch router from accessing HQServer.pka. All other traffic is permitted. Configure the access list on the appropriate router, apply it to the appropriate interface and in the appropriate direction. Page 3 of 6 Packet Tracer - Skills Integration Challenge f. Design a named access list BranchServer to prevent any computers attached to the Gigabit Ethernet 0/0 interface of the HQ router from accessing the Branch server. All other traffic is permitted. Configure the access list on the appropriate router, apply it to the appropriate interface and in the appropriate direction. Page 4 of 6 Packet Tracer - Skills Integration Challenge Page 5 of 6 Packet Tracer - Skills Integration Challenge Page 6 of 6