Chapter 2: Coulomb’s Law

Chapter 2 Coulomb’s Law 2.1 Electric Charge........................................................................................................ 2 2.2 Coulomb's Law ....................................................................................................... 2 Animation 2.1: Van de Graaff Generator .................................................................. 3 2.3 Principle of Superposition....................................................................................... 4 Example 2.1: Three Charges....................................................................................... 4 2.4 Electric Field........................................................................................................... 6 Animation 2.2: Electric Field of Point Charges ........................................................ 7 2.5 Electric Field Lines ................................................................................................. 8 2.6 Force on a Charged Particle in an Electric Field .................................................... 9 2.7 Electric Dipole ...................................................................................................... 10 2.7.1 The Electric Field of a Dipole......................................................................... 11 Animation 2.3: Electric Dipole................................................................................ 12 2.8 Dipole in Electric Field......................................................................................... 12 2.8.1 Potential Energy of an Electric Dipole ........................................................... 13 2.9 Charge Density...................................................................................................... 15 2.9.1 Volume Charge Density.................................................................................. 15 2.9.2 Surface Charge Density .................................................................................. 16 2.9.3 Line Charge Density ....................................................................................... 16 2.10 Electric Fields due to Continuous Charge Distributions....................................... 17 Example 2.2: Electric Field on the Axis of a Rod .................................................... 17 Example 2.3: Electric Field on the Perpendicular Bisector ...................................... 18 Example 2.4: Electric Field on the Axis of a Ring ................................................... 20 Example 2.5: Electric Field Due to a Uniformly Charged Disk ............................... 22 2.11 Summary ............................................................................................................... 24 2.12 Problem-Solving Strategies .................................................................................. 26 2.13 Solved Problems ................................................................................................... 28 2.13.1 2.13.2 2.13.3 2.13.4 2.13.5 2.13.6 Hydrogen Atom ........................................................................................... 28 Millikan Oil-Drop Experiment .................................................................... 29 Charge Moving Perpendicularly to an Electric Field .................................. 30 Electric Field of a Dipole............................................................................. 32 Electric Field of an Arc................................................................................ 35 Electric Field Off the Axis of a Finite Rod.................................................. 36 0 2.14 Conceptual Questions ........................................................................................... 38 2.15 Additional Problems ............................................................................................. 39 2.15.1 2.15.2 2.15.3 2.15.4 2.15.5 2.15.6 2.15.7 2.15.8 Three Point Charges..................................................................................... 39 Three Point Charges..................................................................................... 39 Four Point Charges ...................................................................................... 40 Semicircular Wire ........................................................................................ 40 Electric Dipole ............................................................................................. 41 Charged Cylindrical Shell and Cylinder ...................................................... 41 Two Conducting Balls ................................................................................. 42 Torque on an Electric Dipole....................................................................... 42 1 Coulomb’s Law 2.1 Electric Charge There are two types of observed electric charge, which we designate as positive and negative. The convention was derived from Benjamin Franklin’s experiments. He rubbed a glass rod with silk and called the charges on the glass rod positive. He rubbed sealing wax with fur and called the charge on the sealing wax negative. Like charges repel and opposite charges attract each other. The unit of charge is called the Coulomb (C). The smallest unit of “free” charge known in nature is the charge of an electron or proton, which has a magnitude of e = 1.602 ×10−19 C (2.1.1) Charge of any ordinary matter is quantized in integral multiples of e. An electron carries one unit of negative charge, −e , while a proton carries one unit of positive charge, +e . In a closed system, the total amount of charge is conserved since charge can neither be created nor destroyed. A charge can, however, be transferred from one body to another. 2.2 Coulomb's Law Consider a system of two point charges, q1 and q2 , separated by a distance r in vacuum. The force exerted by q1 on q2 is given by Coulomb's law: F12 = ke q1q2 rˆ r2 (2.2.1) where ke is the Coulomb constant, and rˆ = r / r is a unit vector directed from q1 to q2 , as illustrated in Figure 2.2.1(a). (a) (b) Figure 2.2.1 Coulomb interaction between two charges Note that electric force is a vector which has both magnitude and direction. In SI units, the Coulomb constant ke is given by 2 ke = 1 4πε 0 = 8.9875 × 109 N ⋅ m 2 / C 2 (2.2.2) where ε0 = 1 = 8.85 × 10−12 C 2 N ⋅ m 2 9 2 2 4π (8.99 × 10 N ⋅ m C ) (2.2.3) is known as the “permittivity of free space.” Similarly, the force on q1 due to q2 is given by F21 = −F12 , as illustrated in Figure 2.2.1(b). This is consistent with Newton's third law. As an example, consider a hydrogen atom in which the proton (nucleus) and the electron are separated by a distance r = 5.3 × 10 −11 m . The electrostatic force between the two particles is approximately Fe = ke e 2 / r 2 = 8.2 × 10 −8 N . On the other hand, one may show that the gravitational force is only Fg ≈ 3.6 ×10−47 N . Thus, gravitational effect can be neglected when dealing with electrostatic forces! Animation 2.1: Van de Graaff Generator Consider Figure 2.2.2(a) below. The figure illustrates the repulsive force transmitted between two objects by their electric fields. The system consists of a charged metal sphere of a van de Graaff generator. This sphere is fixed in space and is not free to move. The other object is a small charged sphere that is free to move (we neglect the force of gravity on this sphere). According to Coulomb’s law, these two like charges repel each another. That is, the small sphere experiences a repulsive force away from the van de Graaff sphere. Figure 2.2.2 (a) Two charges of the same sign that repel one another because of the “stresses” transmitted by electric fields. We use both the “grass seeds” representation and the ”field lines” representation of the electric field of the two charges. (b) Two charges of opposite sign that attract one another because of the stresses transmitted by electric fields. The animation depicts the motion of the small sphere and the electric fields in this situation. Note that to repeat the motion of the small sphere in the animation, we have 3 the small sphere “bounce off” of a small square fixed in space some distance from the van de Graaff generator. Before we discuss this animation, consider Figure 2.2.2(b), which shows one frame of a movie of the interaction of two charges with opposite signs. Here the charge on the small sphere is opposite to that on the van de Graaff sphere. By Coulomb’s law, the two objects now attract one another, and the small sphere feels a force attracting it toward the van de Graaff. To repeat the motion of the small sphere in the animation, we have that charge “bounce off” of a square fixed in space near the van de Graaff. The point of these two animations is to underscore the fact that the Coulomb force between the two charges is not “action at a distance.” Rather, the stress is transmitted by direct “contact” from the van de Graaff to the immediately surrounding space, via the electric field of the charge on the van de Graaff. That stress is then transmitted from one element of space to a neighboring element, in a continuous manner, until it is transmitted to the region of space contiguous to the small sphere, and thus ultimately to the small sphere itself. Although the two spheres are not in direct contact with one another, they are in direct contact with a medium or mechanism that exists between them. The force between the small sphere and the van de Graaff is transmitted (at a finite speed) by stresses induced in the intervening space by their presence. Michael Faraday invented field theory; drawing “lines of force” or “field lines” was his way of representing the fields. He also used his drawings of the lines of force to gain insight into the stresses that the fields transmit. He was the first to suggest that these fields, which exist continuously in the space between charged objects, transmit the stresses that result in forces between the objects. 2.3 Principle of Superposition Coulomb’s law applies to any pair of point charges. When more than two charges are present, the net force on any one charge is simply the vector sum of the forces exerted on it by the other charges. For example, if three charges are present, the resultant force experienced by q3 due to q1 and q2 will be F3 = F13 + F23 (2.3.1) The superposition principle is illustrated in the example below. Example 2.1: Three Charges Three charges are arranged as shown in Figure 2.3.1. Find the force on the charge q3 assuming that q1 = 6.0 × 10 −6 C , q2 = − q1 = −6.0 × 10 −6 C , q3 = +3.0 × 10−6 C and a = 2.0 × 10−2 m . 4 Figure 2.3.1 A system of three charges Solution: Using the superposition principle, the force on q3 is F3 = F13 + F23 = q2 q3 ⎞ 1 ⎛ q1q3 ⎜ 2 rˆ13 + 2 rˆ23 ⎟ 4πε 0 ⎝ r13 r23 ⎠ In this case the second term will have a negative coefficient, since q2 is negative. The unit vectors r̂13 and r̂23 do not point in the same directions. In order to compute this sum, we can express each unit vector in terms of its Cartesian components and add the forces according to the principle of vector addition. From the figure, we see that the unit vector r̂13 which points from q1 to q3 can be written as 2 ˆ ˆ rˆ13 = cos θ ˆi + sin θ ˆj = (i + j) 2 Similarly, the unit vector rˆ23 = ˆi points from q2 to q3 . Therefore, the total force is F3 = = q2 q3 ⎞ 1 ⎛ q1q3 1 ⎛ q1q3 2 ˆ ˆ (−q1 )q3 ˆ ⎞ (i + j) + i ⎟⎟ ⎜⎜ ⎜ 2 rˆ13 + 2 rˆ23 ⎟ = 2 4πε 0 ⎝ r13 r23 a2 ⎠ 4πε 0 ⎝ ( 2a ) 2 ⎠ 1 q1q3 4πε 0 a 2 ⎡⎛ 2 ⎞ 2 ˆ⎤ − 1⎟⎟ ˆi + j⎥ ⎢⎜⎜ 4 ⎥⎦ ⎢⎣⎝ 4 ⎠ upon adding the components. The magnitude of the total force is given by 5 12 2 2 1 q1q3 ⎡⎛ 2 ⎞ ⎛ 2 ⎞ ⎤ ⎢⎜ − 1⎟⎟ + ⎜⎜ F3 = ⎟⎟ ⎥ 4πε 0 a 2 ⎢⎜⎝ 4 4 ⎠ ⎝ ⎠ ⎥⎦ ⎣ (6.0 × 10−6 C)(3.0 × 10−6 C) = (9.0 × 109 N ⋅ m 2 / C2 ) (0.74) = 3.0 N (2.0 × 10−2 m) 2 The angle that the force makes with the positive x -axis is ⎛ F3, y ⎞ ⎡ 2/4 ⎤ −1 ⎟⎟ = tan ⎢ ⎥ = 151.3° ⎣ −1 + 2 / 4 ⎦ ⎝ F3, x ⎠ φ = tan −1 ⎜⎜ Note there are two solutions to this equation. The second solution φ = −28.7° is incorrect because it would indicate that the force has positive î and negative ĵ components. For a system of N charges, the net force experienced by the jth particle would be N F j = ∑ Fij (2.3.2) i =1 i≠ j where Fij denotes the force between particles i and j . The superposition principle implies that the net force between any two charges is independent of the presence of other charges. This is true if the charges are in fixed positions. 2.4 Electric Field The electrostatic force, like the gravitational force, is a force that acts at a distance, even when the objects are not in contact with one another. To justify such the notion we rationalize action at a distance by saying that one charge creates a field which in turn acts on the other charge. An electric charge q produces an electric field everywhere. To quantify the strength of the field created by that charge, we can measure the force a positive “test charge” q0 experiences at some point. The electric field E is defined as: Fe q0 → 0 q 0 E = lim (2.4.1) We take q0 to be infinitesimally small so that the field q0 generates does not disturb the “source charges.” The analogy between the electric field and the gravitational field g = lim Fm / m0 is depicted in Figure 2.4.1. m0 → 0 6 Figure 2.4.1 Analogy between the gravitational field g and the electric field E . From the field theory point of view, we say that the charge q creates an electric field E which exerts a force Fe = q0E on a test charge q0 . Using the definition of electric field given in Eq. (2.4.1) and the Coulomb’s law, the electric field at a distance r from a point charge q is given by E= 1 q rˆ 4πε 0 r 2 (2.4.2) Using the superposition principle, the total electric field due to a group of charges is equal to the vector sum of the electric fields of individual charges: E = ∑ Ei = ∑ i i qi rˆ 4πε 0 ri 2 1 (2.4.3) Animation 2.2: Electric Field of Point Charges Figure 2.4.2 shows one frame of animations of the electric field of a moving positive and negative point charge, assuming the speed of the charge is small compared to the speed of light. Figure 2.4.2 The electric fields of (a) a moving positive charge, (b) a moving negative charge, when the speed of the charge is small compared to the speed of light. 7 2.5 Electric Field Lines Electric field lines provide a convenient graphical representation of the electric field in space. The field lines for a positive and a negative charges are shown in Figure 2.5.1. (a) (b) Figure 2.5.1 Field lines for (a) positive and (b) negative charges. Notice that the direction of field lines is radially outward for a positive charge and radially inward for a negative charge. For a pair of charges of equal magnitude but opposite sign (an electric dipole), the field lines are shown in Figure 2.5.2. Figure 2.5.2 Field lines for an electric dipole. The pattern of electric field lines can be obtained by considering the following: (1) Symmetry: For every point above the line joining the two charges there is an equivalent point below it. Therefore, the pattern must be symmetrical about the line joining the two charges (2) Near field: Very close to a charge, the field due to that charge predominates. Therefore, the lines are radial and spherically symmetric. (3) Far field: Far from the system of charges, the pattern should look like that of a single point charge of value Q = ∑ i Qi . Thus, the lines should be radially outward, unless Q = 0. (4) Null point: This is a point at which E = 0 , and no field lines should pass through it. 8 The properties of electric field lines may be summarized as follows: • The direction of the electric field vector E at a point is tangent to the field lines. • The number of lines per unit area through a surface perpendicular to the line is devised to be proportional to the magnitude of the electric field in a given region. • The field lines must begin on positive charges (or at infinity) and then terminate on negative charges (or at infinity). • The number of lines that originate from a positive charge or terminating on a negative charge must be proportional to the magnitude of the charge. • No two field lines can cross each other; otherwise the field would be pointing in two different directions at the same point. 2.6 Force on a Charged Particle in an Electric Field Consider a charge + q moving between two parallel plates of opposite charges, as shown in Figure 2.6.1. Figure 2.6.1 Charge moving in a constant electric field Let the electric field between the plates be E = − E y ˆj , with E y > 0 . (In Chapter 4, we shall show that the electric field in the region between two infinitely large plates of opposite charges is uniform.) The charge will experience a downward Coulomb force Fe = qE (2.6.1) Note the distinction between the charge q that is experiencing a force and the charges on the plates that are the sources of the electric field. Even though the charge q is also a source of an electric field, by Newton’s third law, the charge cannot exert a force on itself. Therefore, E is the field that arises from the “source” charges only. According to Newton’s second law, a net force will cause the charge to accelerate with an acceleration 9 a= qE y ˆ Fe qE j = =− m m m (2.6.2) Suppose the particle is at rest ( v0 = 0 ) when it is first released from the positive plate. The final speed v of the particle as it strikes the negative plate is vy = 2 | ay | y = 2 yqE y m (2.6.3) where y is the distance between the two plates. The kinetic energy of the particle when it strikes the plate is K= 1 2 mv y = qE y y 2 (2.6.4) 2.7 Electric Dipole An electric dipole consists of two equal but opposite charges, + q and − q , separated by a distance 2a , as shown in Figure 2.7.1. Figure 2.7.1 Electric dipole The dipole moment vector p which points from − q to + q (in the + y - direction) is given by p = 2qa ˆj (2.7.1) The magnitude of the electric dipole is p = 2qa , where q > 0 . For an overall chargeneutral system having N charges, the electric dipole vector p is defined as i=N p ≡ ∑ qi ri (2.7.2) i =1 10 where ri is the position vector of the charge qi . Examples of dipoles include HCL, CO, H2O and other polar molecules. In principle, any molecule in which the centers of the positive and negative charges do not coincide may be approximated as a dipole. In Chapter 5 we shall also show that by applying an external field, an electric dipole moment may also be induced in an unpolarized molecule. 2.7.1 The Electric Field of a Dipole What is the electric field due to the electric dipole? Referring to Figure 2.7.1, we see that the x-component of the electric field strength at the point P is ⎛ ⎞ q ⎛ cosθ + cosθ − ⎞ q ⎜ x x ⎟ − − Ex = ⎜ ⎟= 4πε 0 ⎝ r+ 2 r− 2 ⎠ 4πε 0 ⎜ ⎡ x 2 + ( y − a) 2 ⎤ 3/ 2 ⎡ x 2 + ( y + a ) 2 ⎤ 3/ 2 ⎟ ⎦ ⎣ ⎦ ⎠ ⎝⎣ (2.7.3) where r± 2 = r 2 + a 2 ∓ 2ra cos θ = x 2 + ( y ∓ a ) 2 (2.7.4) Similarly, the y -component is Ey = ⎛ ⎞ q ⎛ sin θ + sin θ − ⎞ q ⎜ y−a y+a ⎟ (2.7.5) − = − ⎜ ⎟ 4πε 0 ⎝ r+ 2 r− 2 ⎠ 4πε 0 ⎜ ⎡ x 2 + ( y − a) 2 ⎤ 3/ 2 ⎡ x 2 + ( y + a) 2 ⎤ 3/ 2 ⎟ ⎦ ⎣ ⎦ ⎠ ⎝⎣ In the “point-dipole” limit where r the above expressions reduce to a , one may verify that (see Solved Problem 2.13.4) Ex = 3p sin θ cos θ 4πε 0 r 3 (2.7.6) ( 3cos (2.7.7) and Ey = p 4πε 0 r 3 2 θ − 1) where sin θ = x / r and cos θ = y / r . With 3 pr cos θ = 3p ⋅ r and some algebra, the electric field may be written as E(r ) = 1 ⎛ p 3(p ⋅ r )r ⎞ ⎜− + ⎟ 4πε 0 ⎝ r 3 r5 ⎠ (2.7.8) Note that Eq. (2.7.8) is valid also in three dimensions where r = xˆi + yˆj + zkˆ . The equation indicates that the electric field E due to a dipole decreases with r as 1/ r 3 , 11 unlike the 1/ r 2 behavior for a point charge. This is to be expected since the net charge of a dipole is zero and therefore must fall off more rapidly than 1/ r 2 at large distance. The electric field lines due to a finite electric dipole and a point dipole are shown in Figure 2.7.2. Figure 2.7.2 Electric field lines for (a) a finite dipole and (b) a point dipole. Animation 2.3: Electric Dipole Figure 2.7.3 shows an interactive ShockWave simulation of how the dipole pattern arises. At the observation point, we show the electric field due to each charge, which sum vectorially to give the total field. To get a feel for the total electric field, we also show a “grass seeds” representation of the electric field in this case. The observation point can be moved around in space to see how the resultant field at various points arises from the individual contributions of the electric field of each charge. Figure 2.7.3 An interactive ShockWave simulation of the electric field of an two equal and opposite charges. 2.8 Dipole in Electric Field What happens when we place an electric dipole in a uniform field E = E ˆi , with the dipole moment vector p making an angle with the x-axis? From Figure 2.8.1, we see that the unit vector which points in the direction of p is cos θ ˆi + sin θ ˆj . Thus, we have p = 2qa (cos θ ˆi + sin θ ˆj) (2.8.1) 12 Figure 2.8.1 Electric dipole placed in a uniform field. As seen from Figure 2.8.1 above, since each charge experiences an equal but opposite force due to the field, the net force on the dipole is Fnet = F+ + F− = 0 . Even though the net force vanishes, the field exerts a torque a toque on the dipole. The torque about the midpoint O of the dipole is τ = r+ × F+ + r− × F− = (a cos θ ˆi + a sin θ ˆj) × ( F+ ˆi ) + (− a cos θ ˆi − a sin θ ˆj) × (− F− ˆi ) (2.8.2) = a sin θ F+ (−kˆ ) + a sin θ F− (−kˆ ) = 2aF sin θ (−kˆ ) where we have used F+ = F− = F . The direction of the torque is −kˆ , or into the page. The effect of the torque τ is to rotate the dipole clockwise so that the dipole moment p becomes aligned with the electric field E . With F = qE , the magnitude of the torque can be rewritten as τ = 2a ( qE ) sin θ = (2aq ) E sin θ = pE sin θ and the general expression for toque becomes τ = p×E (2.8.3) Thus, we see that the cross product of the dipole moment with the electric field is equal to the torque. 2.8.1 Potential Energy of an Electric Dipole The work done by the electric field to rotate the dipole by an angle dθ is dW = −τ dθ = − pE sin θ dθ (2.8.4) 13 The negative sign indicates that the torque opposes any increase in θ . Therefore, the total amount of work done by the electric field to rotate the dipole from an angle θ 0 to θ is θ W = ∫ (− pE sin θ ) dθ = pE ( cos θ − cos θ 0 ) θ0 (2.8.5) The result shows that a positive work is done by the field when cos θ > cos θ 0 . The change in potential energy ∆U of the dipole is the negative of the work done by the field: ∆U = U − U 0 = −W = − pE ( cos θ − cos θ 0 ) (2.8.6) where U 0 = − PE cos θ 0 is the potential energy at a reference point. We shall choose our reference point to be θ 0 = π 2 so that the potential energy is zero there, U 0 = 0 . Thus, in the presence of an external field the electric dipole has a potential energy U = − pE cos θ = −p ⋅ E (2.8.7) A system is at a stable equilibrium when its potential energy is a minimum. This takes place when the dipole p is aligned parallel to E , making U a minimum with U min = − pE . On the other hand, when p and E are anti-parallel, U max = + pE is a maximum and the system is unstable. If the dipole is placed in a non-uniform field, there would be a net force on the dipole in addition to the torque, and the resulting motion would be a combination of linear acceleration and rotation. In Figure 2.8.2, suppose the electric field E+ at + q differs from the electric field E− at − q . Figure 2.8.2 Force on a dipole Assuming the dipole to be very small, we expand the fields about x : ⎛ dE ⎞ ⎛ dE ⎞ E+ ( x + a ) ≈ E ( x ) + a ⎜ ⎟ , E− ( x − a ) ≈ E ( x ) − a ⎜ ⎟ ⎝ dx ⎠ ⎝ dx ⎠ (2.8.8) The force on the dipole then becomes 14 ⎛ dE ⎞ ˆ Fe = q (E+ − E − ) = 2qa ⎜ ⎟i = ⎝ dx ⎠ ⎛ dE ⎞ p⎜ ⎟ î ⎝ dx ⎠ (2.8.9) An example of a net force acting on a dipole is the attraction between small pieces of paper and a comb, which has been charged by rubbing against hair. The paper has induced dipole moments (to be discussed in depth in Chapter 5) while the field on the comb is non-uniform due to its irregular shape (Figure 2.8.3). Figure 2.8.3 Electrostatic attraction between a piece of paper and a comb 2.9 Charge Density The electric field due to a small number of charged particles can readily be computed using the superposition principle. But what happens if we have a very large number of charges distributed in some region in space? Let’s consider the system shown in Figure 2.9.1: Figure 2.9.1 Electric field due to a small charge element ∆qi . 2.9.1 Volume Charge Density Suppose we wish to find the electric field at some point P . Let’s consider a small volume element ∆Vi which contains an amount of charge ∆qi . The distances between charges within the volume element ∆Vi are much smaller than compared to r, the distance between ∆Vi and P . In the limit where ∆Vi becomes infinitesimally small, we may define a volume charge density ρ (r ) as ∆qi dq = ∆Vi → 0 ∆V dV i ρ (r ) = lim (2.9.1) 15 The dimension of ρ (r ) is charge/unit volume (C/m3 ) in SI units. The total amount of charge within the entire volume V is Q = ∑ ∆qi = ∫ ρ (r ) dV i (2.9.2) V The concept of charge density here is analogous to mass density ρ m (r ) . When a large number of atoms are tightly packed within a volume, we can also take the continuum limit and the mass of an object is given by M = ∫ ρ m (r ) dV (2.9.3) V 2.9.2 Surface Charge Density In a similar manner, the charge can be distributed over a surface S of area A with a surface charge density σ (lowercase Greek letter sigma): σ (r ) = dq dA (2.9.4) The dimension of σ is charge/unit area (C/m 2 ) in SI units. The total charge on the entire surface is: Q = ∫∫ σ (r ) dA (2.9.5) S 2.9.3 Line Charge Density If the charge is distributed over a line of length (lowercase Greek letter lambda) is λ (r ) = dq d , then the linear charge density λ (2.9.6) where the dimension of λ is charge/unit length (C/m) . The total charge is now an integral over the entire length: Q= ∫ λ (r ) d (2.9.7) line 16 If charges are uniformly distributed throughout the region, the densities ( ρ , σ or λ ) then become uniform. 2.10 Electric Fields due to Continuous Charge Distributions The electric field at a point P due to each charge element dq is given by Coulomb’s law: dE = 1 dq rˆ 4πε 0 r 2 (2.10.1) where r is the distance from dq to P and r̂ is the corresponding unit vector. (See Figure 2.9.1). Using the superposition principle, the total electric field E is the vector sum (integral) of all these infinitesimal contributions: E= 1 dq ∫r 4πε 0 V 2 rˆ (2.10.2) This is an example of a vector integral which consists of three separate integrations, one for each component of the electric field. Example 2.2: Electric Field on the Axis of a Rod A non-conducting rod of length with a uniform positive charge density λ and a total charge Q is lying along the x -axis, as illustrated in Figure 2.10.1. Figure 2.10.1 Electric field of a wire along the axis of the wire Calculate the electric field at a point P located along the axis of the rod and a distance x0 from one end. Solution: The linear charge density is uniform and is given by λ = Q / . The amount of charge contained in a small segment of length dx ′ is dq = λ dx′ . 17 Since the source carries a positive charge Q, the field at P points in the negative x direction, and the unit vector that points from the source to P is rˆ = −ˆi . The contribution to the electric field due to dq is dE = dq 1 λ dx′ ˆ 1 Qdx′ ˆ rˆ = i (− i ) = − 2 2 4πε 0 r 4πε 0 x′ 4πε 0 x′2 1 Integrating over the entire length leads to E = ∫ dE = − 1 Q 4πε 0 ∫ x0 + x0 dx′ ˆ 1 Q⎛ 1 1 ⎞ˆ 1 Q ˆi (2.10.3) i=− ⎜ − ⎟i = − 2 4πε 0 ⎝ x0 x0 + ⎠ 4πε 0 x0 ( + x0 ) x′ Notice that when P is very far away from the rod, x0 becomes E≈− , and the above expression 1 Qˆ i 4πε 0 x02 (2.10.4) The result is to be expected since at sufficiently far distance away, the distinction between a continuous charge distribution and a point charge diminishes. Example 2.3: Electric Field on the Perpendicular Bisector A non-conducting rod of length with a uniform charge density λ and a total charge Q is lying along the x -axis, as illustrated in Figure 2.10.2. Compute the electric field at a point P, located at a distance y from the center of the rod along its perpendicular bisector. Figure 2.10.2 Solution: We follow a similar procedure as that outlined in Example 2.2. The contribution to the electric field from a small length element dx ′ carrying charge dq = λ dx′ is 18 dE = dq 1 λ dx′ = 2 4πε 0 r ′ 4πε 0 x′2 + y 2 1 (2.10.5) Using symmetry argument illustrated in Figure 2.10.3, one may show that the x component of the electric field vanishes. Figure 2.10.3 Symmetry argument showing that Ex = 0 . The y-component of dE is dE y = dE cos θ = λ dx′ 1 4πε 0 x′ + y 2 y x′2 + y 2 2 = 1 λ y dx′ 4πε 0 ( x′ + y 2 )3/ 2 2 (2.10.6) By integrating over the entire length, the total electric field due to the rod is E y = ∫ dE y = 1 4πε 0 ∫ /2 − /2 λ ydx′ ( x′ + y ) 2 2 3/ 2 = λy 4πε 0 ∫ dx′ / 2 ( x′ + y 2 ) 3/ 2 /2 − 2 (2.10.7) By making the change of variable: x′ = y tan θ ′ , which gives dx′ = y sec 2 θ ′ dθ ′ , the above integral becomes ∫ − θ dx′ y sec 2 θ ′dθ ′ 1 θ sec 2 θ ′dθ ′ 1 =∫ 3 = 2∫ = 2 2 3/ 2 θ −θ y (sec 2 θ ′ + 1) 3/ 2 − / 2 ( x′2 + y 2 )3/ 2 y (tan θ ′ + 1) y 1 θ dθ ′ 1 θ 2sin θ = 2∫ = 2 ∫ cos θ ′dθ ′ = y −θ sec θ ′ y −θ y2 /2 sec 2 θ ′dθ ′ ∫−θ secθ ′3 θ (2.10.8) which gives Ey = 2λ sin θ 1 2λ = y 4πε 0 4πε 0 y 1 /2 y 2 + ( / 2) 2 (2.10.9) 19 In the limit where y , the above expression reduces to the “point-charge” limit: Ey ≈ On the other hand, when 2λ / 2 1 λ 1 Q = = 2 4πε 0 y y 4πε 0 y 4πε 0 y 2 1 (2.10.10) y , we have Ey ≈ 2λ 4πε 0 y 1 (2.10.11) In this infinite length limit, the system has cylindrical symmetry. In this case, an alternative approach based on Gauss’s law can be used to obtain Eq. (2.10.11), as we shall show in Chapter 4. The characteristic behavior of E y / E0 (with E0 = Q / 4πε 0 2 ) as a function of y / is shown in Figure 2.10.4. Figure 2.10.4 Electric field of a non-conducting rod as a function of y / . Example 2.4: Electric Field on the Axis of a Ring A non-conducting ring of radius R with a uniform charge density λ and a total charge Q is lying in the xy - plane, as shown in Figure 2.10.5. Compute the electric field at a point P, located at a distance z from the center of the ring along its axis of symmetry. Figure 2.10.5 Electric field at P due to the charge element dq . 20 Solution: Consider a small length element d ′ on the ring. The amount of charge contained within this element is dq = λ d ′ = λ R dφ ′ . Its contribution to the electric field at P is dE = 1 λ R dφ ′ dq rˆ = rˆ 2 4πε 0 r 4πε 0 r 2 1 (2.10.12) Figure 2.10.6 Using the symmetry argument illustrated in Figure 2.10.6, we see that the electric field at P must point in the + z direction. dEz = dE cos θ = 1 λ R dφ ′ 4πε 0 R + z 2 2 z R2 + z 2 = λ Rz dφ ′ 2 4πε 0 ( R + z 2 )3/ 2 (2.10.13) Upon integrating over the entire ring, we obtain Ez = λ Rz 2 4πε 0 ( R + z 2 )3/ 2 λ ∫ dφ ′ = 4πε 2π Rz 1 Qz = 2 3/ 2 2 (R + z ) 4πε 0 ( R + z 2 )3/ 2 2 0 (2.10.14) where the total charge is Q = λ (2π R ) . A plot of the electric field as a function of z is given in Figure 2.10.7. Figure 2.10.7 Electric field along the axis of symmetry of a non-conducting ring of radius R, with E0 = Q / 4πε 0 R 2 . 21 Notice that the electric field at the center of the ring vanishes. This is to be expected from symmetry arguments. Example 2.5: Electric Field Due to a Uniformly Charged Disk A uniformly charged disk of radius R with a total charge Q lies in the xy-plane. Find the electric field at a point P , along the z-axis that passes through the center of the disk perpendicular to its plane. Discuss the limit where R  z . Solution: By treating the disk as a set of concentric uniformly charged rings, the problem could be solved by using the result obtained in Example 2.4. Consider a ring of radius r ′ and thickness dr ′ , as shown in Figure 2.10.8. Figure 2.10.8 A uniformly charged disk of radius R. By symmetry arguments, the electric field at P points in the + z -direction. Since the ring has a charge dq = σ (2π r ′ dr ′) , from Eq. (2.10.14), we see that the ring gives a contribution dEz = z dq 1 z (2πσ r ′ dr ′) = 2 3/ 2 4πε 0 (r ′ + z ) 4πε 0 (r ′2 + z 2 )3/ 2 1 2 (2.10.15) Integrating from r ′ = 0 to r ′ = R , the total electric field at P becomes σz Ez = ∫ dEz = 2ε 0 ∫ R 0 r ′ dr ′ σz = 2 2 3/ 2 (r ′ + z ) 4ε 0 ∫ R2 + z 2 z2 2 2 du σ z u −1/ 2 R + z = u 3/ 2 4ε 0 (−1/ 2) z 2 ⎤ σz ⎡ 1 1 ⎤ σ ⎡ z z =− − = − ⎢ 2 ⎥ ⎢ ⎥ 2ε 0 ⎣ R + z 2 z 2 ⎦ 2ε 0 ⎣ | z | R2 + z 2 ⎦ (2.10.16) 22 The above equation may be rewritten as ⎧ σ ⎡ ⎤ z , ⎪ ⎢1 − 2 ⎥ z + R2 ⎦ ⎪ 2ε 0 ⎣ Ez = ⎨ ⎤ z ⎪σ ⎡ − − 1 , ⎢ ⎥ ⎪ 2ε z 2 + R2 ⎦ ⎩ 0⎣ z>0 (2.10.17) z<0 The electric field Ez / E0 ( E0 = σ / 2ε 0 ) as a function of z / R is shown in Figure 2.10.9. Figure 2.10.9 Electric field of a non-conducting plane of uniform charge density. To show that the “point-charge” limit is recovered for z Taylor-series expansion: ⎛ R2 ⎞ 1− = 1 − ⎜1 + 2 ⎟ z ⎠ z 2 + R2 ⎝ z −1/ 2 ⎛ 1 R2 = 1 − ⎜1 − + 2 ⎝ 2 z R , we make use of the ⎞ 1 R2 ⎟≈ 2 ⎠ 2 z (2.10.18) This gives σ R2 1 σπ R 2 1 Q = = Ez = 2 2 2ε 0 2 z 4πε 0 z 4πε 0 z 2 (2.10.19) which is indeed the expected “point-charge” result. On the other hand, we may also consider the limit where R z . Physically this means that the plane is very large, or the field point P is extremely close to the surface of the plane. The electric field in this limit becomes, in unit-vector notation, ⎧ σ ˆ ⎪ 2ε k , ⎪ 0 E=⎨ ⎪− σ kˆ , ⎪⎩ 2ε 0 z>0 (2.10.20) z<0 23 The plot of the electric field in this limit is shown in Figure 2.10.10. Figure 2.10.10 Electric field of an infinitely large non-conducting plane. Notice the discontinuity in electric field as we cross the plane. The discontinuity is given by ∆Ez = Ez + − Ez − = σ ⎛ σ ⎞ σ −⎜− ⎟= 2ε 0 ⎝ 2ε 0 ⎠ ε 0 (2.10.21) As we shall see in Chapter 4, if a given surface has a charge density σ , then the normal component of the electric field across that surface always exhibits a discontinuity with ∆En = σ / ε 0 . 2.11 Summary • The electric force exerted by a charge q1 on a second charge q2 is given by Coulomb’s law: F12 = ke q1q2 1 q1q2 rˆ = r̂ 2 r 4πε 0 r 2 where ke = 1 4πε 0 = 8.99 × 109 N ⋅ m 2 / C2 is the Coulomb constant. • The electric field at a point in space is defined as the electric force acting on a test charge q0 divided by q0 : Fe q0 → 0 q 0 E = lim 24 • The electric field at a distance r from a charge q is E= • q rˆ 4πε 0 r 2 Using the superposition principle, the electric field due to a collection of point charges, each having charge qi and located at a distance ri away is E= • 1 ∑r 4πε 0 i 2 rˆi i A particle of mass m and charge q moving in an electric field E has an acceleration a= • qi 1 qE m An electric dipole consists of two equal but opposite charges. The electric dipole moment vector p points from the negative charge to the positive charge, and has a magnitude p = 2aq • The torque acting on an electric dipole places in a uniform electric field E is τ = p×E • The potential energy of an electric dipole in a uniform external electric field E is U = −p ⋅ E • The electric field at a point in space due to a continuous charge element dq is dE = • 1 dq rˆ 4πε 0 r 2 At sufficiently far away from a continuous charge distribution of finite extent, the electric field approaches the “point-charge” limit. 25 2.12 Problem-Solving Strategies In this chapter, we have discussed how electric field can be calculated for both the discrete and continuous charge distributions. For the former, we apply the superposition principle: E= 1 4πε 0 qi ∑r i 2 rˆi i For the latter, we must evaluate the vector integral E= 1 4πε 0 ∫ dq rˆ r2 where r is the distance from dq to the field point P and r̂ is the corresponding unit vector. To complete the integration, we shall follow the procedures outlined below: (1) Start with dE = 1 dq rˆ 4πε 0 r 2 (2) Rewrite the charge element dq as ⎧λ d ⎪ dq = ⎨σ dA ⎪ ρ dV ⎩ (length) (area) (volume) depending on whether the charge is distributed over a length, an area, or a volume. (3) Substitute dq into the expression for dE . (4) Specify an appropriate coordinate system (Cartesian, cylindrical or spherical) and express the differential element ( d , dA or dV ) and r in terms of the coordinates (see Table 2.1 below for summary.) dl Cartesian (x, y, z) dx, dy , dz Cylindrical (ρ, φ, z) d ρ , ρ dφ , dz Spherical (r, θ, φ) dr , r dθ , r sin θ dφ dA dx dy , dy dz , dz dx d ρ dz , ρ dφ dz , ρ dφ d ρ r dr dθ , r sin θ dr dφ , r 2 sin θ dθ dφ dV dx dy dz ρ d ρ dφ dz r 2 sin θ dr dθ dφ Table 2.1 Differential elements of length, area and volume in different coordinates 26 (5) Rewrite dE in terms of the integration variable(s), and apply symmetry argument to identify non-vanishing component(s) of the electric field. (6) Complete the integration to obtain E . In the Table below we illustrate how the above methodologies can be utilized to compute the electric field for an infinite line charge, a ring of charge and a uniformly charged disk. Line charge Ring of charge Uniformly charged disk dq = λ dx′ dq = λ d dq = σ dA Figure (2) Express dq in terms of charge density (3) Write down dE (4) Rewrite r and the differential element in terms of the appropriate coordinates (5) Apply symmetry argument to identify non-vanishing component(s) of dE dE = ke r′ 2 dE = ke dx′ cos θ = y r′ λ ydx′ ( x′ + y ) 2 + /2 − /2 = r dE = ke 2 2 3/ 2 r = R2 + z2 dx ( x2 + y2 )3/ 2 /2 2keλ y ( / 2)2 + y2 (R + z ) 2 2 3/ 2 Rλ z ( R + z 2 )3/ 2 (2π Rλ ) z = ke 2 2 3/ 2 (R + z ) Qz = ke 2 2 3/ 2 (R + z ) E z = ke 2 r2 dEz = dE cos θ λ Rz dφ ′ = ke σ dA dA = 2π r ' dr ' z cos θ = r 2 r = r′ + z 2 dEz = dE cos θ dE y = dE cos θ = ke λ dl d = R dφ ′ z cos θ = r r ′ = x′2 + y 2 Ey = keλ y∫ (6) Integrate to get E λ dx′ ∫ dφ ′ = ke 2πσ zr ′ dr ′ (r ′2 + z 2 )3/ 2 Ez = 2πσke z∫ R 0 r′ dr′ (r′ + z2 )3/2 2 ⎛ z z ⎞ = 2πσke ⎜ − ⎟ 2 2 ⎝| z | z + R ⎠ 27 2.13 Solved Problems 2.13.1 Hydrogen Atom In the classical model of the hydrogen atom, the electron revolves around the proton with a radius of r = 0.53 × 10 −10 m . The magnitude of the charge of the electron and proton is e = 1.6 ×10−19 C . (a) What is the magnitude of the electric force between the proton and the electron? (b) What is the magnitude of the electric field due to the proton at r? (c) What is ratio of the magnitudes of the electrical and gravitational force between electron and proton? Does the result depend on the distance between the proton and the electron? (d) In light of your calculation in (b), explain why electrical forces do not influence the motion of planets. Solutions: (a) The magnitude of the force is given by 1 e2 Fe = 4πε 0 r 2 Now we can substitute our numerical values and find that the magnitude of the force between the proton and the electron in the hydrogen atom is Fe = (9.0 ×109 N ⋅ m 2 / C2 )(1.6 × 10−19 C)2 = 8.2 ×10−8 N −11 2 (5.3 ×10 m) (b) The magnitude of the electric field due to the proton is given by E= q (9.0 ×109 N ⋅ m 2 / C2 )(1.6 × 10−19 C) = = 5.76 × 1011 N / C 4πε 0 r 2 (0.5 ×10−10 m) 2 1 (c) The mass of the electron is me = 9.1× 10 −31 kg and the mass of the proton is m p = 1.7 ×10−27 kg . Thus, the ratio of the magnitudes of the electric and gravitational force is given by 28 ⎛ 1 e2 ⎞ 1 2 e ⎜ 2 ⎟ 4πε 0 r ⎠ 4πε 0 (9.0 × 109 N ⋅ m 2 / C2 )(1.6 × 10−19 C) 2 ⎝ γ= = = = 2.2 ×1039 2 2 −11 −27 −31 ⎛ m p me ⎞ Gm p me (6.67 × 10 N ⋅ m / kg )(1.7 × 10 kg)(9.1× 10 kg) ⎜G 2 ⎟ r ⎠ ⎝ which is independent of r, the distance between the proton and the electron. (d) The electric force is 39 orders of magnitude stronger than the gravitational force between the electron and the proton. Then why are the large scale motions of planets determined by the gravitational force and not the electrical force. The answer is that the magnitudes of the charge of the electron and proton are equal. The best experiments show that the difference between these magnitudes is a number on the order of 10 −24 . Since objects like planets have about the same number of protons as electrons, they are essentially electrically neutral. Therefore the force between planets is entirely determined by gravity. 2.13.2 Millikan Oil-Drop Experiment An oil drop of radius r = 1.64 ×10−6 m and mass density ρ oil = 8.51× 102 kg m3 is allowed to fall from rest and then enters into a region of constant external field E applied in the downward direction. The oil drop has an unknown electric charge q (due to irradiation by bursts of X-rays). The magnitude of the electric field is adjusted until the gravitational force Fg = mg = − mg ˆj on the oil drop is exactly balanced by the electric Fe = qE. Suppose this balancing occurs when E = − E y ˆj = −(1.92 × 105 N C) ˆj , with E y = 1.92 ×105 N C . force, the electric field is (a) What is the mass of the oil drop? (b) What is the charge on the oil drop in units of electronic charge e = 1.6 ×10−19 C ? Solutions: (a) The mass density ρoil times the volume of the oil drop will yield the total mass M of the oil drop, ⎛4 ⎞ M = ρ oilV = ρ oil ⎜ π r 3 ⎟ ⎝3 ⎠ where the oil drop is assumed to be a sphere of radius r with volume V = 4π r 3 / 3 . Now we can substitute our numerical values into our symbolic expression for the mass, 29 ⎛4 ⎞ ⎛ 4π ⎞ −6 3 −14 M = ρ oil ⎜ π r 3 ⎟ = (8.51× 102 kg m 3 ) ⎜ ⎟ (1.64×10 m) = 1.57×10 kg 3 3 ⎝ ⎠ ⎝ ⎠ (b) The oil drop will be in static equilibrium when the gravitational force exactly balances the electrical force: Fg + Fe = 0 . Since the gravitational force points downward, the electric force on the oil must be upward. Using our force laws, we have 0 = mg + qE ⇒ mg = − qE y With the electrical field pointing downward, we conclude that the charge on the oil drop must be negative. Notice that we have chosen the unit vector ĵ to point upward. We can solve this equation for the charge on the oil drop: q=− mg (1.57 × 10−14 kg)(9.80 m / s 2 ) =− = −8.03 × 10−19 C 5 Ey 1.92 × 10 N C Since the electron has charge e = 1 . 6 × 10− 19 C , the charge of the oil drop in units of e is N= q 8.02 ×10−19 C = =5 e 1.6 ×10−19 C You may at first be surprised that this number is an integer, but the Millikan oil drop experiment was the first direct experimental evidence that charge is quantized. Thus, from the given data we can assert that there are five electrons on the oil drop! 2.13.3 Charge Moving Perpendicularly to an Electric Field An electron is injected horizontally into a uniform field produced by two oppositely charged plates, as shown in Figure 2.13.1. The particle has an initial velocity v 0 = v0 ˆi perpendicular to E . Figure 2.13.1 Charge moving perpendicular to an electric field 30 (a) While between the plates, what is the force on the electron? (b) What is the acceleration of the electron when it is between the plates? (c) The plates have length L1 in the x -direction. At what time t1 will the electron leave the plate? (d) Suppose the electron enters the electric field at time t = 0 . What is the velocity of the electron at time t1 when it leaves the plates? (e) What is the vertical displacement of the electron after time t1 when it leaves the plates? (f) What angle θ1 does the electron make θ1 with the horizontal, when the electron leaves the plates at time t1 ? (g) The electron hits the screen located a distance L2 from the end of the plates at a time t2 . What is the total vertical displacement of the electron from time t = 0 until it hits the screen at t2 ? Solutions: (a) Since the electron has a negative charge, q = −e , the force on the electron is F e = qE = −eE = (−e)(− E y )ˆj = eE y ˆj where the electric field is written as E = − E y ˆj , with E y > 0 . The force on the electron is upward. Note that the motion of the electron is analogous to the motion of a mass that is thrown horizontally in a constant gravitational field. The mass follows a parabolic trajectory downward. Since the electron is negatively charged, the constant force on the electron is upward and the electron will be deflected upwards on a parabolic path. (b) The acceleration of the electron is a= qE eE qE = − y ˆj = y ˆj m m m and its direction is upward. 31 (c) The time of passage for the electron is given by t1 = L1 / v0 . The time t1 is not affected by the acceleration because v0 , the horizontal component of the velocity which determines the time, is not affected by the field. (d) The electron has an initial horizontal velocity, v 0 = v0 ˆi . Since the acceleration of the electron is in the + y -direction, only the y -component of the velocity changes. The velocity at a later time t1 is given by ⎛ eE y v = vx ˆi + v y ˆj = v0 ˆi + a y t1 ˆj = v0 ˆi + ⎜ ⎝ m ⎞ ˆ ˆ ⎛ eE y L1 ⎟⎞ ˆj ⎟ t1 j = v0 i + ⎜ ⎠ ⎝ mv0 ⎠ (e) From the figure, we see that the electron travels a horizontal distance L1 in the time t1 = L1 v0 and then emerges from the plates with a vertical displacement 1 1 ⎛ eE y ⎞ ⎛ L1 ⎞ y1 = a y t12 = ⎜ ⎟⎜ ⎟ 2 2 ⎝ m ⎠ ⎝ v0 ⎠ 2 (f) When the electron leaves the plates at time t1 , the electron makes an angle θ1 with the horizontal given by the ratio of the components of its velocity, tan θ = vy vx = (eE y / m)( L1 / v0 ) v0 = eE y L1 mv0 2 (g) After the electron leaves the plate, there is no longer any force on the electron so it travels in a straight path. The deflection y2 is y2 = L2 tan θ1 = eE y L1 L2 mv0 2 and the total deflection becomes 2 1 eE y L1 eE y L1 L2 eE y L1 ⎛ 1 ⎞ y = y1 + y2 = + = L1 + L2 ⎟ 2 2 2 ⎜ mv0 mv0 ⎝ 2 2 mv0 ⎠ 2.13.4 Electric Field of a Dipole Consider the electric dipole moment shown in Figure 2.7.1. (a) Show that the electric field of the dipole in the limit where r a is 32 Ex = 3p p sin θ cos θ , E y = 3cos 2 θ − 1) 3 3 ( 4πε 0 r 4πε 0 r where sin θ = x / r and cos θ = y / r . (b) Show that the above expression for the electric field can also be written in terms of the polar coordinates as E(r ,θ ) = Er rˆ + Eθ θˆ where Er = 2 p cos θ p sin θ , Eθ = 3 4πε 0 r 4πε 0 r 3 Solutions: (a) Let’s compute the electric field strength at a distance r a due to the dipole. The x component of the electric field strength at the point P with Cartesian coordinates ( x, y, 0) is given by Ex = ⎛ ⎞ q ⎛ cosθ + cosθ − ⎞ q ⎜ x x ⎟ − = − ⎜ ⎟ r− 2 ⎠ 4πε 0 ⎜ ⎡ x 2 + ( y − a) 2 ⎤ 3/ 2 ⎡ x 2 + ( y + a ) 2 ⎤ 3/ 2 ⎟ 4πε 0 ⎝ r+ 2 ⎦ ⎣ ⎦ ⎠ ⎝⎣ where r± 2 = r 2 + a 2 ∓ 2ra cos θ = x 2 + ( y ∓ a ) 2 Similarly, the y -component is given by Ey = ⎛ ⎞ q ⎛ sin θ + sin θ − ⎞ q ⎜ y−a y+a ⎟ − = − ⎜ ⎟ r− 2 ⎠ 4πε 0 ⎜ ⎡ x 2 + ( y − a) 2 ⎤ 3/ 2 ⎡ x 2 + ( y + a) 2 ⎤ 3/ 2 ⎟ 4πε 0 ⎝ r+ 2 ⎦ ⎣ ⎦ ⎠ ⎝⎣ We shall make a polynomial expansion for the electric field using the Taylor-series expansion. We will then collect terms that are proportional to 1/ r 3 and ignore terms that are proportional to 1/ r 5 , where r = +( x 2 + y 2 )1 2 . We begin with 33 2 −3/ 2 [ x + ( y ± a) ] 2 −3/ 2 = [ x + y + a ± 2ay ] 2 2 2 ⎡ a 2 ± 2ay ⎤ = r ⎢1 + ⎥ r2 ⎣ ⎦ −3/ 2 −3 In the limit where r >> a , we use the Taylor-series expansion with s ≡ (a 2 ± 2ay ) / r 2 : (1 + s ) −3 / 2 = 1 − 3 15 s + s 2 − ... 2 8 and the above equations for the components of the electric field becomes Ex = q 6 xya + ... 4πε 0 r 5 and Ey = q ⎛ 2a 6 y 2 a ⎞ + 5 ⎟ + ... ⎜− 4πε 0 ⎝ r 3 r ⎠ where we have neglected the O( s 2 ) terms. The electric field can then be written as E = Ex ˆi + E y ˆj = q ⎡ 2a ˆ 6 ya ˆ p ⎤ − 3 j + 5 ( x i + y ˆj) ⎥ = 3 ⎢ 4πε 0 ⎣ r r ⎦ 4πε 0 r ⎡ 3 yx ˆ ⎛ 3 y 2 ⎞ ⎤ ⎢ 2 i + ⎜ 2 − 1 ⎟ ˆj⎥ ⎝ r ⎠ ⎦ ⎣ r where we have made used of the definition of the magnitude of the electric dipole moment p = 2aq . In terms of the polar coordinates, with sin θ = x r and cosθ = y r (as seen from Figure 2.13.4), we obtain the desired results: Ex = 3p sin θ cos θ, 4πε 0 r 3 Ey = p 4πε 0 r 3 ( 3cos 2 θ − 1) (b) We begin with the expression obtained in (a) for the electric dipole in Cartesian coordinates: E( r ,θ ) = ⎡3sin θ cos θ ˆi + ( 3cos 2 θ − 1) ˆj⎤ ⎦ 4πε 0 r ⎣ p 3 With a little algebra, the above expression may be rewritten as 34 E( r ,θ ) = = ( ) ( ) ⎡ 2 cos θ sin θ ˆi + cos θ ˆj + sin θ cos θ ˆi + ( cos 2 θ − 1) ˆj⎤ ⎦ 4πε 0 r ⎣ p 3 p ( ) ⎡ 2 cos θ sin θ ˆi + cosθ ˆj + sin θ cosθ ˆi − sin θ ˆj ⎤ ⎦ 4πε 0 r 3 ⎣ where the trigonometric identity ( cos 2 θ − 1) = − sin 2 θ has been used. Since the unit vectors r̂ and θ̂ in polar coordinates can be decomposed as rˆ = sin θ ˆi + cos θ ˆj θˆ = cos θ ˆi − sin θ ˆj, the electric field in polar coordinates is given by E( r ,θ ) = p ⎡ 2 cos θ rˆ + sin θ θˆ ⎤ ⎦ 4πε 0 r 3 ⎣ and the magnitude of E is E = ( Er 2 + Eθ 2 )1/ 2 = p 4πε 0 r ( 3cos θ + 1) 2 3 1/ 2 2.13.5 Electric Field of an Arc A thin rod with a uniform charge per unit length λ is bent into the shape of an arc of a circle of radius R. The arc subtends a total angle 2θ 0 , symmetric about the x-axis, as shown in Figure 2.13.2. What is the electric field E at the origin O? Solution: Consider a differential element of length d = R dθ , which makes an angle θ with the x - axis, as shown in Figure 2.13.2(b). The amount of charge it carries is dq = λ d = λ R dθ . The contribution to the electric field at O is dE = dq 1 dq 1 λ dθ rˆ = − cos θ ˆi − sin θ ˆj = − cos θ ˆi − sin θ ˆj 2 2 4πε 0 r 4πε 0 R 4πε 0 R 1 ( ) ( ) 35 Figure 2.13.2 (a) Geometry of charged source. (b) Charge element dq Integrating over the angle from −θ 0 to +θ 0 , we have E= ˆi − sin θ ˆj = 1 λ − sin θ ˆi + cos θ ˆj θ 0 = − 1 2λ sin θ 0 ˆi θ θ − d cos −θ 0 4πε 0 R ∫−θ0 4πε 0 R 4πε 0 R 1 λ θ0 ( ) ( ) We see that the electric field only has the x -component, as required by a symmetry argument. If we take the limit θ 0 → π , the arc becomes a circular ring. Since sin π = 0 , the equation above implies that the electric field at the center of a non-conducting ring is zero. This is to be expected from symmetry arguments. On the other hand, for very small θ0 , sin θ 0 ≈ θ 0 and we recover the point-charge limit: E≈− 2λθ 0 ˆ 1 2λθ 0 R ˆ 1 Q ˆ i=− i=− i 2 4πε 0 R 4πε 0 R 4πε 0 R 2 1 where the total charge on the arc is Q = λ = λ (2 Rθ 0 ) . 2.13.6 Electric Field Off the Axis of a Finite Rod A non-conducting rod of length with a uniform charge density λ and a total charge Q is lying along the x -axis, as illustrated in Figure 2.13.3. Compute the electric field at a point P, located at a distance y off the axis of the rod. Figure 2.13.3 36 Solution: The problem can be solved by following the procedure used in Example 2.3. Consider a length element dx′ on the rod, as shown in Figure 2.13.4. The charge carried by the element is dq = λ dx′ . Figure 2.13.4 The electric field at P produced by this element is dq 1 λ dx′ rˆ = − sin θ ′ ˆi + cos θ ′ ˆj 2 4πε 0 r ′ 4πε 0 x′2 + y 2 ( 1 dE = ) where the unit vector r̂ has been written in Cartesian coordinates: rˆ = − sin θ ′ ˆi + cos θ ′ ˆj . In the absence of symmetry, the field at P has both the x- and y-components. The xcomponent of the electric field is dE x = − 1 λ dx′ 4πε 0 x′ + y 2 2 sin θ ′ = − 1 λ dx′ 4πε 0 x′ + y 2 x′ 2 x′ + y 2 2 =− 1 λ x′ dx′ 4πε 0 ( x′2 + y 2 )3/ 2 Integrating from x′ = x1 to x′ = x2 , we have λ Ex = − 4πε 0 ∫ x2 x1 2 2 x′ dx′ λ 1 x22 + y 2 du λ −1/ 2 x2 + y =− = u 2 2 ( x′2 + y 2 )3/ 2 4πε 0 2 ∫x12 + y 2 u 3/ 2 4πε 0 x1 + y = ⎤ ⎤ λ ⎡ 1 1 λ ⎡ y y ⎢ ⎥= ⎢ ⎥ − − 2 2 2 2 2 2 4πε 0 ⎢ x22 + y 2 4 πε y ⎥ ⎢ ⎥⎦ + + + x y x y x y 0 1 1 ⎣ ⎦ ⎣ 2 = λ ( cos θ 2 − cos θ1 ) 4πε 0 y Similarly, the y-component of the electric field due to the charge element is 37 dE y = λ dx′ 1 4πε 0 x′ + y 2 2 cos θ ′ = 1 λ dx′ 4πε 0 x′ + y 2 y x′ + y 2 2 2 = 1 λ ydx′ 4πε 0 ( x′ + y 2 )3/ 2 2 Integrating over the entire length of the rod, we obtain Ey = λy 4πε 0 ∫ x2 x1 dx′ λy 1 = 2 3/ 2 ( x′ + y ) 4πε 0 y 2 2 θ2 ∫θ cos θ ′ dθ ′ = 1 λ ( sin θ 2 − sin θ1 ) 4πε 0 y where we have used the result obtained in Eq. (2.10.8) in completing the integration. In the infinite length limit where x1 → −∞ and x2 → +∞ , with xi = y tan θi , the corresponding angles are θ1 = −π / 2 and θ 2 = +π / 2 . Substituting the values into the expressions above, we have E x = 0, Ey = 2λ 4πε 0 y 1 in complete agreement with the result shown in Eq. (2.10.11). 2.14 Conceptual Questions 1. Compare and contrast Newton’s law of gravitation, Fg = Gm1m2 / r 2 , and Coulomb’s law, Fe = kq1q2 / r 2 . 2. Can electric field lines cross each other? Explain. 3. Two opposite charges are placed on a line as shown in the figure below. The charge on the right is three times the magnitude of the charge on the left. Besides infinity, where else can electric field possibly be zero? 4. A test charge is placed at the point P near a positively-charged insulating rod. 38 How would the magnitude and direction of the electric field change if the magnitude of the test charge were decreased and its sign changed with everything else remaining the same? 5. An electric dipole, consisting of two equal and opposite point charges at the ends of an insulating rod, is free to rotate about a pivot point in the center. The rod is then placed in a non-uniform electric field. Does it experience a force and/or a torque? 2.15 Additional Problems 2.15.1 Three Point Charges Three point charges are placed at the corners of an equilateral triangle, as shown in Figure 2.15.1. Figure 2.15.1 Three point charges Calculate the net electric force experienced by (a) the 9.00 µ C charge, and (b) the −6.00 µ C charge. 2.15.2 Three Point Charges A right isosceles triangle of side a has charges q, +2q and −q arranged on its vertices, as shown in Figure 2.15.2. 39 Figure 2.15.2 What is the electric field at point P, midway between the line connecting the +q and −q charges? Give the magnitude and direction of the electric field. 2.15.3 Four Point Charges Four point charges are placed at the corners of a square of side a, as shown in Figure 2.15.3. Figure 2.15.3 Four point charges (a) What is the electric field at the location of charge q ? (b) What is the net force on 2q? 2.15.4 Semicircular Wire A positively charged wire is bent into a semicircle of radius R, as shown in Figure 2.15.4. Figure 2.15.4 40 The total charge on the semicircle is Q. However, the charge per unit length along the semicircle is non-uniform and given by λ = λ0 cosθ . (a) What is the relationship between λ0 , R and Q? (b) If a charge q is placed at the origin, what is the total force on the charge? 2.15.5 Electric Dipole An electric dipole lying in the xy-plane with a uniform electric field applied in the + x direction is displaced by a small angle θ from its equilibrium position, as shown in Figure 2.15.5. Figure 2.15.5 The charges are separated by a distance 2a, and the moment of inertia of the dipole is I. If the dipole is released from this position, show that its angular orientation exhibits simple harmonic motion. What is the frequency of oscillation? 2.15.6 Charged Cylindrical Shell and Cylinder (a) A uniformly charged circular cylindrical shell of radius R and height h has a total charge Q. What is the electric field at a point P a distance z from the bottom side of the cylinder as shown in Figure 2.15.6? (Hint: Treat the cylinder as a set of ring charges.) Figure 2.15.6 A uniformly charged cylinder 41 (b) If the configuration is instead a solid cylinder of radius R , height h and has a uniform volume charge density. What is the electric field at P? (Hint: Treat the solid cylinder as a set of disk charges.) 2.15.7 Two Conducting Balls Two tiny conducting balls of identical mass m and identical charge q hang from nonconducting threads of length l . Each ball forms an angle θ with the vertical axis, as shown in Figure 2.15.9. Assume that θ is so small that tanθ ≈ sin θ . Figure 2.15.9 (a) Show that, at equilibrium, the separation between the balls is 13 ⎛ q2 ⎞ r =⎜ ⎟ ⎝ 2πε 0 mg ⎠ (b) If l = 1.2 × 102 cm , m = 1.0 × 101 g , and x = 5.0 cm , what is q ? 2.15.8 Torque on an Electric Dipole An electric dipole consists of two charges q1 = +2e and q2 = −2e ( e = 1.6 × 10− 19 C ), separated by a distance d = 10− 9 m . The electric charges are placed along the y-axis as shown in Figure 2.15.10. Figure 2.15.10 42 Suppose a constant external electric field Eext = (3 ˆi + 3ˆj)N/C is applied. (a) What is the magnitude and direction of the dipole moment? (b) What is the magnitude and direction of the torque on the dipole? (c) Do the electric fields of the charges q1 and q2 contribute to the torque on the dipole? Briefly explain your answer. 43