Analyzing the Degree of Relationship in Computerized Economics: R-Value and R-Square Determination Test • R = 0.245 means that the relationship (relation) between BI1, BI2, BI3, BI4, CS1, CS2, CS3, CS4 and SB4 (Y) is 24.5%, meaning that the relationship is not tight. The greater the R means the relationship is getting stronger. Value 0.0 - 0.19 0.2 - 0.39 0.4 - 0.59 0.6 - 0.79 0.8 - 0.99 Interpretation Very heavy Not heavy Quite heavy Erat Sangaterat • R Square of 0.060 means 0.60% of Loyalty can be explained by BI1, BI2, BI3, BI4, CS1, CS2, CS3, CS4 while the remaining 99.40% can be explained by other factors. other factors not examined by this research. • Adjusted R Square of 0.033 means that 0.33% of Loyalty can be explained by BI1, BI2, BI3, BI4, CS1, CS2, CS3, CS4 while the remaining 99.67% can be explained by other factors not examined by this research. • Standard Error of Estimated means measuring the variation of the predicted value. Standard Error of Estimated can also be called standard deviation. In the table, the Standard Error of Estimated is 0.69657. the smaller the standard deviation, the better the model and vice versa, if the standard deviation gets bigger, the worse the model. ANOVA (F TEST) • The table above reveals that the calculated F value is 6.49 with a significant level of 0.000. while F table at 95% confidence level (0.05). by because the calculation of F count> F table and the significant level of 0.000 <0.05, shows that the influence of the independent variables BI1, BI2, BI3, BI4, CS1, CS2, CS3, CS4 as a whole is positive and significant on loyalty (Y). • In the table, it can be seen that regression df = 8 means that the number of independent variables is 8, namelyBI1,BI2,BI3,BI4,CS1,CS2,CS3,CS4. • Total df = 89 means that the number of respondents/data is 89 (where df = n-1) while the residual df = 81 is derived from 89-8 • Mean Square: Sum of Square/df. In the regression mean square table (3.15) = 2.520/8.