Distance-Time and Velocity-Time Graphs

Name: Date: Distance-Time and Velocity-Time Graphs Directions: Follow the instructions to go through the simulation. Respond to the questions and prompts in the orange boxes. [NOTE TO TEACHERS AND STUDENTS: This lesson was designed as a follow-up to the Distance-Time Graphs Gizmo. We recommend you complete that activity before this one.] Vocabulary: displacement, distance traveled, slope, speed, velocity Prior Knowledge Questions (Do these BEFORE using the Gizmo.) Dora runs one lap around the track, finishing where she started. Clark runs a 100yard dash along the straight side of the track. 1. Which runner traveled a greater distance? Dora 2. Which runner had a greater change in position, start to finish? Clark Gizmo Warm-up The Distance-Time Graphs Gizmo shows a dynamic graph of the position of a runner over time. The DistanceTime and Velocity-Time Graphs Gizmo includes that same graph and adds two new ones: a velocity vs. time graph and a distance traveled vs. time graph. The graph shown below (and in the Gizmo) shows a runner’s position (or distance from the starting line) over time. This is most commonly called a position-time graph. Check that the Number of Points is 2. Turn on Show graph and Show animation for both Runner 1 and Runner 2. 1. Drag the points to create the graph shown to the right. ● Runner 1’s line (the red one) should have endpoints at (0, 0) and (4, 40). ● Runner 2’s line (the blue one) should have endpoints at (0, 40) and (4, 20). 2. Click the green Start button on the stopwatch. Watch the two runners carefully. In what two ways are the runners’ motions different? they are moving in opposite directions Activity A: Velocity-time graphs Get the Gizmo ready: ● Click the red Reset button on the stopwatch. ● Change the Number of Points to 5. ● Turn off Show graph and Show animation for Runner 2. Speed is a measure of how fast an object moves, regardless of direction. Speed can never be negative. Velocity describes both speed and direction, and can be positive or negative. 1. In the Gizmo, make a position-time graph for Runner 1 with the following features: ● There is at least one major change in speed. ● There is at least one major change in direction. Click the green Start button and watch the runner run. Adjust your graph if needed to meet the requirements. ✏️ Hand draw in this space or click here to select EDIT to use the drawing tool. Sketch your graph to the right. 2. Where was the runner each second? Based on your graph, fill in all except the final column in the table below. (Leave the velocity column blank for now.) Label any numbers with units. Time Position at end of time interval (yds) Distance moved this time interval (yds) To the left or right? Velocity this time interval (y/s) 0 – 1 sec 40yds 40yds right 40y/s 1 – 2 sec 40yds 40yds right 0y/s 2 – 3 sec 40yds 40yds right 0y/s 3 – 4 sec 30yds 10yds left 10y/s 3. To calculate the velocity for each time interval, first calculate the speed of the runner in that interval (speed = distance ÷ time). If the direction is left to right, velocity is positive. If the direction is right to left, velocity is negative. Fill in the velocity column of the table above. Use units (y/s). When this runner is running to the left (negative velocity), what does his position-time graph look like? slanted down, negative slope 4. Slope is the steepness of a graph. To find the slope of a line, divide the change in y-value (rise) by the change in x-value (run). Like velocity, slope can be positive, zero, or negative. Fill in the slope of each segment of your position-time graph, along with the runner’s velocity during each time interval, in the table below. Time interval Slope 0 sec – 1 sec 40/1 Velocity (y/s) 40y/s 1 sec – 2 sec 0/0 0y/s 2 sec – 3 sec 0/0 0y/s 3 sec – 4 sec -10/1 - 10y/s 5. Examine your velocities and the position-time graph you made. How is the slope of a position-time graph related to the velocity of the runner? positive slope = move to the right, negative slope = move to the left 6. On the left side of the Gizmo, select the VELOCITY-TIME GRAPH tab. Use the green probes to compare the velocity-time graph to the position-time graph. A. How does a velocity-time graph show that a runner is moving fast? the y value determines how fast or slow the runner is running B. How does a velocity-time graph show that a runner is moving from left to right? with a positive slope or a negative slope 7. To the right is a position-time graph of a ✏️ Hand draw in this space or runner. click here to select EDIT to use the drawing tool. First, sketch what you think his velocitytime graph will look like on the blank axes at the far right. Then check your answer in the Gizmo. Activity B: Velocity and position Get the Gizmo ready: ● Set the Number of Points to 3. ● Turn on Show graph and Show animation for both Runner 1 and Runner 2. 1. In the Gizmo, make the position-time graphs shown below. Click the green Start button and watch the runners ✏️ run. Hand draw in this space or click here to select EDIT to use the drawing tool. Sketch what you think their velocity-time graphs look like on the second set of axes. (If you can, use a red line for runner 1, and a blue line for runner 2.) Then select the VELOCITY-TIME GRAPH tab in the Gizmo. Sketch the actual graph on the third set of axes below. Velocity-time (predicted) Position-time graph 2. Velocity-time (actual) Make any ✏️2. Hand draw in this space or click here to select position -time graphs you want for Runners 1 and EDIT to use the drawing tool. Sketch them below. Then do the same thing – sketch what you think their velocity-time graphs look like, and then check. 3. Compare the velocity-time graphs to their related position-time graphs. A. When do two different position-time graphs have matching velocity-time graphs? (0,0) A. What information is missing from a velocity-time graph? displacement Activity C: Get the Gizmo ready: ● Turn off Show graph and Show animation for Runner 2. Distance and displacement 1. Create the position-time graph for Runner 1 shown at right. Then fill in the blanks below to describe what you think the runner will do, based on that graph. The runner will run 40 yards in the first 2 seconds, with a velocity of 20 positive y/s. His direction will be from to positive Then he will run with a velocity of positive 10 5 to yards in the next 2 seconds, y/s. His direction will be from negative Click the green Start button and watch the runner go. Were you correct? yes 2. Two students, Gina and Walter, are discussing the runner whose graph is shown above. ● Gina says the runner moved more than 40 yards. ● Walter says the runner moved less than 40 yards. A. Who do you think is right? Gina B. Explain your answer because you have to ad the distance together 3. On top of the left half of the Gizmo, select the DISTANCE TRAVELED tab. A. What was the total distance traveled by the runner after 4 seconds? 50yds B. Displacement is equal to the difference between the starting and ending positions. Displacement to the right is positive while displacement to the left is negative. What is the displacement shown by the graph at the top of the page 4. In the Gizmo, create a position-time graph of a runner with these characteristics: ● travels a distance of 60 yards in 4 seconds ● has a displacement of +10 yards ✏️ Hand draw in this space or click here to select EDIT to use the drawing tool. Sketch your graph on the blank axes to the right. 5. Look at the graph you made in question 4. Think about the speed of that runner. 30 yds A. What was the runner’s speed for the first 2 seconds? 25y/s B. What was the runner’s speed for the last 2 seconds? 10y/s C. What was the runner’s average speed over all 4 seconds? 15y/s 6. Now think about the velocity of the runner in question 4. A. What was the runner’s velocity for the first 2 seconds? 25y/s B. What was the runner’s velocity for the last 2 seconds? 10y/s C. What was the runner’s average velocity over all 4 seconds? 15y/s 7. Suppose you knew the time, displacement, and total distance traveled for a runner. A. How would you calculate the runners’ average speed? distance/time B. How would you calculate the runners’ average velocity? displacement/time 8. To the right is a graph of a runner. Calculate the values below for this runner. Include appropriate units. A. Distance traveled: 100m B. Displacement: +20 C. Average speed: 25m/s D. Average velocity: 5m/s