University:
Coventry University
Course:
115 BMS | Introduction to Biomedical Analysis
Academic year:

2024
Views:

14

Pages:

4
Author:

Badusha S

Spue foamy deameles). 3mm-26mm Imm. Reseviq Length of squecee - Ging 6 CIBI 3mm-PB1 too lay ? too short spure cause incomplete casting" Spure attachment I deop of done by a small deo At bulkiest part:- alloy Palloy lis to lis to flow to Thinney Pollon with lovey speed / less turbulent Sune rented 45° inclination @inclinaten to reduce terdent few to letter of mould 3 Roseevore!- Direct suury Reso attachment -made by laege doop of wax. Ishonloag porosities. to muri lo alised shinies Indirect specing! Reserve baap provide extra in to empanada Solidificaduo sinkage Bave expensive PBI+ casting time. SM should not to orvented towards ext this section of wall then. Clusible formel atikahol Greve former to other and 3. Casting ung dimmest ring → cell dose/alumna silicate anode lambic lines alle casad -fns:- Allaw lateral expansion of mud •Longer longitudinal expansion. exhe water los HSE • Split casting eing for adequate. Tal expansion. war pattern washed with a dible designed fun to umary greasy materials. delight layers led us cause wittry. Eleckic of eesistance heating system. Heu Cortect adjatom of temp of allay lig (AE1H5) Electrical modulus mellag system: AC curent of high frequency. electric arc melting system (EAMS) Produces blow water called toples Terop shoot of moss than 200 melt alloy pointedly Vaccum pressure aside cardy more. Allay melled ma vacuum by click's aus casting is done under carbon pas peiss wer