Fundamentals of Workplace Safety Practices | Morehouse College

University:
Morehouse College
Course:
HBIO 240 | Introduction to Public Health Science
Academic year:

2023
Views:

353

Pages:

1
Author:

ilikemyicons0y5

Module 1- safety Question Companies with strong safety cultures usually have lover? Poor Lighting, excessive noise, and inadequate guards for moving parts are examples of ? The activity that consists of breaking a job component tasks and the analyzing each step for potential hazards is called a? A measure of the probability, consequences, and exposure related to an event is referred to as a ? If there is a hole in the floor od a structure, the preferred method of protecting workers from falls is to ? Make a list of five true statements regarding safety The D-ring or support point on a safety harness should be placed? A personal fall arrest system should be inspected monthly by? Lanyards that have no shock-absorbing features are used for? When placing a ladder against a platform or roof, the top of he ladder should extend above the point where the ladder touches the platform or roof by at least? When performing overhead work on scaffolding, what protective measures must be taken to prevent objects from falling and striking a person below? when stacking material such as bricks or blocks, do not stack materials beyond a ? Benching systems are prohibited in? In the absence of the other information, all soil in an excavation should be treated as if it is? Daily inspection of an excavation must be performed by an? One of the most common grounding systems used for protection against accidental electrical shock is the? A Polarized electrical receptacle is used for? A system that protects workers from the release of hazardous energy while they work with machines and equipment is referred to as? In a Lockout/tagout situation, a personal lock and tag must be removed by? Hard hats should be made of fiberglass or? a good general rule about hearing protection is that it should be used if you must raise your voice for someone to hear you when they are? Answer Turnovers Unsafe conditions Job safety analysis Risk Cover the opening and label the cover Safety is a learned behavior and attitude. In the middle of the back A competent person Positioning 3 Feet(91cm) Toe boards, debris nets, or canopies must be applied 4:1 Height-to base ratio type C Soils type C soil competent person Three -wire-system Double Insulated tools Lockout/tagout The person who applied them Reinforced plastic 2feet (61cm) away Report it to a supervisor and avoid disturbing it The respirator that would be used where dust or solid particles might be inhaled Half mask or mouth piece with a is a? mechanical filter One source of led on some job site is? Paint Hepatitis can be caused by contact with Blood The body temperature rises Heat exhaustion differs from heat stroke in that? slightly When other workers are working near a welding operation, the standard Screen the work area with practice is to? welding shields Which of the following conditions is considered life threating? Heatstroke when there is the potential to be exposed to asbestos, workers must?